View Full Version : PN. R32 Non ABS master cyclinder

28th August 2013, 11:39 PM

Anyone know the part no for the Non ABS R32 GTS ?. Brake master cyclinder ( two lines in not 3)

Need to get a couple


29th August 2013, 07:56 AM
Not sure on the part number but I have 2 r32 brake masters both ABS and both have 2 lines. I thought the the Non ABS had 3.

29th August 2013, 10:19 AM
Correct -

NON abs - has 3 ports
ABS - has 2 ports

They are a BM44 or a BM50,
not to sure on part number though....

29th August 2013, 04:54 PM
i can give you a part number that will get you a BM44 15/16th Master with 3 outlets....however....im certain its an s13/180sx version and itll fit...the advantage of the r32 non turbo type is it doesnt have an internal bias valve so you can retain the standard ae86 one or run an adjustable wilwood/tilton one more successfully...


this website might help someone that has the patience to spend time "researching"....nissan master cylinders are actually confusing as fuck

29th August 2013, 08:05 PM
Thanks for the info

I have one which has two ports on the side and the third is blanked off.(std cast )

I got it along time ago for the RX7 setup on my AE86 track car but it has been sitting around for so long I would rather just get a new one for piece of mind

Do I need the non abs or abs as I thought mine was the non abs


29th August 2013, 08:23 PM
For my rx7 setup I use a non abs ( 3 x outlets) with one blocked off.

29th August 2013, 09:33 PM
on the end of the master it should have a stamp Craig.. 5 numbers/letters.. id be interested to know which one you have..

its most definitely an ABS type if it is only 2 port however

29th August 2013, 10:27 PM
I have R33 gts-t brake booster, vacuum hose and 3port BM44 from non-abs wreck..can email u a pic if u want.
I can do express postage for $10... not sure if brand new is cheap for you or not, but i can look for a serial number or something on it for u if there is one?