View Full Version : Ke7o build
kcworks
14th October 2014, 09:09 PM
Well had some ae71s and 86s
Parted out my last 86 kept a few thing over 4 years ago now
Went out to a drift practice the other week
Come home and found a ke to chop up and build
Well so far have diff setup out of my 86
Still have motor to go in the 70 also
Here some pics
Motor setup going in it http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541099.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541100.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541101.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541102.jpg
Almost finished stripping it
Bought the car from a young guy up the north coast no diff and missing front doors
Got some doors and started stripping
If anyone wants a fuel tank
And some other stuff just send me a pm
The ink few other things there that will just go in the bin
kcworks
14th October 2014, 10:51 PM
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541104.jpg
kcworks
14th October 2014, 10:52 PM
fuel cell to go in
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541105.jpg
kcworks
14th October 2014, 10:54 PM
S13 arms ,brakes and coilovers going in the front and rear
Looking at hsd
Rear is all k sport adjustable heim rear end looking at longer uppers
Full cage
All the body to go
kcworks
14th October 2014, 11:01 PM
Some pics of the old sprinter back in the day
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541106.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541107.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541108.jpg
kcworks
20th October 2014, 08:46 PM
Picked up some driftworks knuckles
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541193.jpg
Also ordered some lower arms
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541195.jpg
Hubs and brakes just got to find some
Not sure what coilovers to get looking at either hsd hr series
Or milano just going to gather a few more bits and get started on the front
Foley
22nd October 2014, 02:14 AM
Coming along nicely :)
kcworks
24th October 2014, 07:06 PM
Friday at o fun
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541336.jpg
Started out with some dry ice to remove it all
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541337.jpg
Have done most of the car need to do tunnel and firewall but so far going on 9 to 10 kg http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541338.jpg
So when done should be around the 12 to 13 i wasn't expecting it to weigh that much been a few years since doing it to car much easier with the ice
Go my lower arms just working out what coilovers
,http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541339.jpg
kcworks
26th October 2014, 06:34 PM
Well was going to buy new coilovers but these come up isc ones so grabbed them have to start putting it all in now http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/541341.jpg
batmo
29th October 2014, 09:14 AM
Nice work. Subscribed :)
kcworks
30th November 2014, 08:04 PM
Picked up a set of works Ewing15x9.5 -14
And finally put the ke in the garage so can start more work on it
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542091.jpg
kcworks
3rd January 2015, 12:00 PM
few more things for the car
Have to start some fab now http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542514.jpg
kcworks
9th January 2015, 03:41 PM
So the start of more cutting 1 down 3 to go plus boot and bonnet http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542613.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542614.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542615.jpg
kcworks
10th January 2015, 11:23 PM
Few more pics from the other day and today
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542632.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542633.jpg
Also got some paint stripper on the bonnet and passenger door http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542634.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542635.jpg
Got the remover off a mate see how it goes he reckon it's good gear
kcworks
11th January 2015, 05:45 PM
I side bare really
Still a bit to go and then start on the cage
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542636.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542637.jpg
kcworks
11th January 2015, 05:46 PM
Put on. With a brush and cover scrap off after 6 hours good paint stripper http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542638.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542639.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542640.jpg
kcworks
18th January 2015, 12:32 PM
All the glass is out http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542717.jpg
Got the s13 rear towershttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542718.jpg
thinking of curtting the rear quarter off the drivers side is a bit worse for wear after abortion of a big job by someone was 20mm thick in places http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542719.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542720.jpg
kcworks
18th January 2015, 12:33 PM
that was before making a dust storm http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542721.jpg
batmo
19th January 2015, 10:31 PM
I like your level of weight saving. Are you going for Lexcen windows?
drift kid
20th January 2015, 05:23 AM
I like your level of weight saving. Are you going for Lexcen windows?
He's going to have to now lol, nothing left to hold the glass ones in
kcworks
20th January 2015, 10:35 AM
Yeah I will be
The rear I'll be welding a section to rear door as they are going to be welded shut remove door handle and so on
So I can just rivet them on
kcworks
24th January 2015, 07:24 PM
Did a little more cutting have gone from 8kg to 5.7kg
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542808.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542809.jpg
drift kid
24th January 2015, 09:44 PM
It allit all counts, keep at it
kcworks
26th January 2015, 11:59 AM
Started on the abortion bog job on the weather stripshttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542813.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542814.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542815.jpg
On the up side no rust on the passenger side
kcworks
26th January 2015, 07:50 PM
Well had some fun today welded in a steel infill ground back
Bit of filler and prime not to do the other side
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542816.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542817.jpg
Cut the fuel flat out as deleting it
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542818.jpg
Used a slide hammer to get some of the section of the quarter where it should be
drift kid
26th January 2015, 08:47 PM
Damn! That bog work
kcworks
26th January 2015, 08:51 PM
None really in it now how it should have been done in The first place
For the look old mate wanted
I looked at fixing it but was going to be
more work to get the nice chrome strip for it so just weld it up only going to be a track car
But couldn't leave it the way it was
kcworks
2nd February 2015, 09:54 PM
Managed to finish the other side
Now the rest of the roof and then panels
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542870.jpg
But more cutting and before I get some telling me
that is on bump stops and yes I know about the panhard still more work until I move on to suspension http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542871.jpg
1kg removed
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542872.jpg
kcworks
2nd February 2015, 09:56 PM
And total for the sound deadening was 16kg
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542873.jpg
kcworks
2nd February 2015, 09:56 PM
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542874.jpg
kcworks
7th February 2015, 06:36 PM
Once I get some work out the way can put the car in the shed once it's up and start on the cage http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542921.jpg
kcworks
7th February 2015, 06:38 PM
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/542922.jpg
haveaparty
7th February 2015, 10:41 PM
looks good man. one thing I see as a bit of a time waster was drilling the holes through the supports, all that for a couple kg's. keen to see ur fab work on the cage tho
kcworks
7th February 2015, 10:53 PM
Didn't take long all adds up in the long run just a fun build
kcworks
11th February 2015, 09:30 PM
Went and see a mate with one of my wheels he had a 180 with r33 brakes
Didn't clear
But had a go at the s14 and clear so looks like I'll be going that way now on the front
kcworks
22nd February 2015, 12:41 PM
WELL SHED IS ALL DONE NOW
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/543170.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/543171.jpg
drift kid
22nd February 2015, 02:09 PM
Ohhhhhh yeah baby, that is what dreams are made of
kcworks
22nd February 2015, 02:59 PM
Taken a while to get it sorted but finally all done
kcworks
23rd February 2015, 08:02 PM
Ke70
- was 4AGZE now 4agte
- Balanced bottom end
- ARP everything from main, rod, flywheel, head studs bolts
- Lightened crank took 2.5kg of it
- 440cc injectors
- ported head bigger intake and exhaust ferrea valves formula Altaic ones
- hks valve springs caps and collets
- hks 264 intake and exhaust cams
- hks cam gears
- comtic 2mm head gasket
- custom intake manifold with bell mouths inside vn v8 throttle body
- custom exhaust manifold
- exccedy 5Puck sprung button clutch
- Custom sump with extra 1lt
- Remote mount oil filter and cooler
kcworks
23rd February 2015, 08:04 PM
That was the specs on the motor
looking at New throttle body
But will have different injectors and new fuel rail
kcworks
23rd February 2015, 08:18 PM
http://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/543214.jpghttp://www.ae86drivingclub.com.au/dcimages/1/8/2/3/6/543215.jpg
kcworks
11th October 2015, 02:12 PM
Parting out don't have the time to to finish the build pm if interested in any of the gear
Sent from my HTC_0P6B using Tapatalk
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.