looks tough as nails.
what injectors you running?
so another year, another revamp for my 86, this is the build list for 2009, enjoy, stay tuned
ENGINE
CA18DET
KKR 330
Highmount stainless steel manifold
444cc GTR Injectors
Z32 AFM
Cosmetic Metal Head Gasket
ARP Head Studs
Hybrid Front Mount Intercooler
Apexi Intake
Nistune ECU Chip
Carter Lifter Pump
Bosch 070 Fuel Pump
Surge Tank
206RWKW @ 16psi Tuned by Dr. Drift
DRIVETRAIN
OS Giken Lightened Flywheel
OS Giken Carbon Clutch
Borg Warner R31 Differential, Mount swapped and minispooled w/4.11:1
Custom 1 Piece 3 Inch Tailshaft
SUSPENSION
KYB AGX 8 Way Adjustable Shock Absorbers
Techno Toy Tuning Coilover Weld on Kit
Techno Toy Tuning Cambertops
Eibach 8 Kg/mm Front Springs
Techno Toy Tuning Cambertops
Techno Toy Tuning Negative Roll Centre Adjusters
Techno Toy Tuning Adjustable Castor Rods
AJPS Lock Spacer
KYB Sierra Rear Shock Absorbers
AJPS 6 Kg/mm Rear Springs (have to get)
Rose Jointed Trailing arms (have to get)
Whiteline Adjustable Panhard Rod
Alignment Specifications
-3.5 Camber
+3.0 Castor
+2mm Total Toe
BRAKING
AJPS Caliper Adaptors
Mazda FC RX7 4 Piston Calipers
Honda Civic EG Front Disc Rotors
Holden Commodore VR Rear Calipers (pedal brake)
Holden Commodore VR Rear Calipers (hydraulic handbrake)
Nissan Skyline R32 Non ABS Master Cylinder
INTERIOR
Reclinable Bucket Seat
Bolt in Half Cage
GKTECH Drift Steering Wheel
ISC Hydraulic Handbrake
VDO 5” Tachometer
Custom cluster, consisting on 7 gauges + Blitz Power Meter
Fully Stripped and Gutted, Re Carpeted
EXTERIOR
Kouki Front Bar (have to get)
JDM Foglights (have to get)
Kouki Rear Bar (have to get)
FRP Bonnet (have to get)
Dmax D1 Style Front Fenders (have to get)
Whiteline Taillights (have to get)
WHEELS
2 X 15 x 8 – 4 Performance Superlights
2 X 15 x 7 +- 0 Meshies
4 x 14 x 6.5 + 20 Meshies
Last edited by DRFTR86; 28th October 2009 at 12:29 PM.
looks tough as nails.
what injectors you running?
1984 JDM Zenki Trueno GT-Apex Hatch
4AGE 16V
+Quads, HKS 264 cams, Microtech LT10s, TRD gearset gearbox, TRD2WAY LSD, fun!
FOR SALE: JDM 4AG PACKAGE+ITEMS (ENGINE/GBOX/EXHAUST/ECU/SHIT)
http://www.ae86drivingclub.com.au/fo...ad.php?p=15205
what kinda cams do you have to pull 90kws?
I think it says WADE 800A cams!.....dope ride by the way! I like the setup.
Back 2wrk I go. :/
Wade 800A Cams are:
Profile No : 800a
Lobe Lift : Ex .360 In .360
Timing AdOpen Close : 80-48 50-78
Duration @.050 : Ex 253 In 253
Valve Clr : 010
Valve Lift : 0.350
Lobe Sep : 105Rocker Ratio 1.6 : Competition mid to top end
needs springs
Those would dimensions would be in inches.
Valve Lift: 8.89mm
Lobe Lift (Ex 9.144mm In 9.144mm)
Vlave Clearance: 2.54mm
Last edited by Wally; 20th December 2008 at 08:02 AM.
1984 JDM Zenki Trueno GT-Apex Hatch
4AGE 16V
+Quads, HKS 264 cams, Microtech LT10s, TRD gearset gearbox, TRD2WAY LSD, fun!
FOR SALE: JDM 4AG PACKAGE+ITEMS (ENGINE/GBOX/EXHAUST/ECU/SHIT)
http://www.ae86drivingclub.com.au/fo...ad.php?p=15205
the specs of the cams.. relax there buddy
awesome, thanks for that mate. i expected the duration to be alot higher for 90rwkw's? or is the dyno fairly number happy?
just curious as thats close to what im building the next engine to, just with slightly more aggressive cams
didn't mean to come off all loco, I guess it was just the formulation of the question....No harm, no fowl.
cams put out a big kick at about 4500 rpm, sound like a vtec flat out cos of the quadz