AE86 Driving Club - Hachiroku Admirers
...
+ Reply to Thread
Page 1 of 2
1 2 LastLast
Results 1 to 20 of 31

Thread: [FS] ADM Ae86 Shell - commonly known as Dirty Ibis

  1. #1
    Local Outcast Beau's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Australia
    Posts
    1,264

    Default [FS] ADM Ae86 Shell - commonly known as Dirty Ibis

    Ok guys some may or may not know but i have Drift Battles (Jeremy's) Old 86 commonly known as Dirty Ibis - the green one.

    Well im selling it as i need room for other shit if i dont sell it i'll slowly build it up or something.

    Specs:
    - Equal Length channels in the floor
    - Welded in half cage
    - Black Dash
    - Shell Wiring (no engine wiring)
    - Carpet
    - No rust
    - Dead straight
    - Great shell for someone who wants some with no body work needed.
    - Steering Column
    - AE86 Brake booster and R32 Master Cylinder
    - Some other bits here and there.

    The Downs:
    - One of the runners of the half cage has been cut off however i can re weld this on for the buyer
    - The rear part of the tailshaft tunnel has been cut (to fit a hilux diff)
    - No rear arches BUT i can supply (for a fee) Origin rear bolt on flares (copies - but epic ones we make)
    - No cross member

    Im asking $1000.00 take it away + Origin Bolt on flares are $250.00 + i can also make up some rose jointed equal length arms for the buyer which would be a cost id work out with the buyer.

    I think thats pretty good deal considering most shells in worst condition would cost you from $800.00 up, a half cage is about $500.00 and more, the equal length channels could be anywhere from $300.00 upwards not to mention everything else.

    I will have some detail pictures up tomorrow. I do apologize my camera has been on the fritz and i only got it working today.

    MORE DETAILS AND PICTURES BELOW!!
    Last edited by Beau; 3rd October 2009 at 06:58 PM.
    http://i682.photobucket.com/albums/vv181/driftkulture/lavivahate.jpg

  2. #2
    Local Outcast Beau's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Australia
    Posts
    1,264

    Default






    No the bike isnt included.
    http://i682.photobucket.com/albums/vv181/driftkulture/lavivahate.jpg

  3. #3
    Love it in the butt
    Join Date
    Jan 2009
    Location
    Cronulla
    Posts
    2,349

    Default

    is the bike inclued? haha

    do u rember i use to ride at menai with you?
    <a href=http://i100.photobucket.com/albums/m26/callumknowles/corksig-1-1.jpg target=_blank>http://i100.photobucket.com/albums/m...orksig-1-1.jpg</a>

  4. #4
    Local Outcast Beau's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Australia
    Posts
    1,264

    Default

    Quote Originally Posted by Beau View Post
    No the bike isnt included.
    as stated
    http://i682.photobucket.com/albums/vv181/driftkulture/lavivahate.jpg

  5. #5
    Local Outcast Beau's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Australia
    Posts
    1,264

    Default

    This also comes with all the glass.
    http://i682.photobucket.com/albums/vv181/driftkulture/lavivahate.jpg

  6. #6
    Senior Member wntdae86's Avatar
    Join Date
    Apr 2009
    Location
    westside melb footscray
    Posts
    573

    Default

    keep the car but i want the bmx ??

  7. #7
    Local Outcast Beau's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Australia
    Posts
    1,264

    Default

    Just a word up.
    Shell has now been resprayed in Toyota Red (exact same color they came stock in) inside and underneath has been coated in anti chip black and engine bay has been cleaned and sprayed in ultra white.

    price will rise with more stuff added.

    Next coming is a complete FRP Trueno front
    http://i682.photobucket.com/albums/vv181/driftkulture/lavivahate.jpg

  8. #8
    Member pandatureno86's Avatar
    Join Date
    Dec 2008
    Posts
    81

    Default

    Hey mate, can you get the shell rolling?

  9. #9
    Local Outcast Beau's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Australia
    Posts
    1,264

    Default

    Yes see below.



    Ok.

    Option 1:
    - Shell
    - Doors
    - S Series Diff
    - Origin Bolt on Flares
    - Fresh respray inside and out and engine bay.

    Price: $2500.00

    Option 2:
    - Shell
    - Doors
    - S Series Diff
    - Origin Bolt on Flares
    - Fresh respray inside and out and engine bay.
    - Hatch with TRD wing
    - FRP Trueno Guards (made in house with love)
    - FRP Trueno Bonnet
    - FRP aftermarket front bar (i think its goodline with a twist)

    Price: $3500.00

    Option 3:
    - Shell
    - Doors
    - S Series Diff
    - Origin Bolt on Flares
    - Fresh respray inside and out and engine bay.
    - Hatch with TRD wing
    - FRP Trueno Guards (made in house with love)
    - FRP Trueno Bonnet
    - FRP aftermarket front bar (i think its goodline with a twist)
    - Set of 15x8 -4 Superlight rims with Tires.
    - Rose Jointed Equal length trailing arms (in house)
    - Some sort of stock front running gear.

    Price: $ 4500.00

    Specs on shell:
    Specs:
    - Equal Length channels in the floor
    - Welded in half cage
    - Black Dash
    - Shell Wiring (no engine wiring)
    - No rust
    - Dead straight
    - Great shell for someone who wants some with no body work needed.
    - Steering Column
    - AE86 Brake booster and R32 Master Cylinder
    - Fresh respray in Factory Toyota ae86 Red with white engine bay. Resprayed black underneath and inside.

    Perfect for someone who wants to build themselves the right car instead of buying someone else problems.





    Contact me on 0405 177 427. I dont answer private numbers so leave a msg. No tyre kickers
    http://i682.photobucket.com/albums/vv181/driftkulture/lavivahate.jpg

  10. #10
    Senior Member zookieboi's Avatar
    Join Date
    Mar 2009
    Location
    Gold Coast
    Posts
    103

    Default

    gday any chance you'd be willing to separate trueno front end with a good condition adm front + cash?
    if not gl with sale.
    Clutch Droppin Daddies. No questions.... Its just how we roll

  11. #11
    Local Outcast Beau's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Australia
    Posts
    1,264

    Default

    Well you can PM me and I might be able to supply you with a complete FRP Trueno front end including the headlight covers. But needs to be made first.
    http://i682.photobucket.com/albums/vv181/driftkulture/lavivahate.jpg

  12. #12
    Local Outcast Beau's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Australia
    Posts
    1,264

    Default

    Pump up the jam!
    http://i682.photobucket.com/albums/vv181/driftkulture/lavivahate.jpg

  13. #13
    Local Outcast Beau's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Australia
    Posts
    1,264

    Default

    Fucking bump!
    http://i682.photobucket.com/albums/vv181/driftkulture/lavivahate.jpg

  14. #14
    AwesumaPowa
    Guest

    Default

    Hey mate, keen in option 2...But your photos have stopped loading!

    Reckon you can rehost'em or send to ae86@davidwatson.com.au

    Cheers

  15. #15
    AwesumaPowa
    Guest

    Default

    Ok, they're working again Haha

  16. #16
    Local Outcast Beau's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Australia
    Posts
    1,264

    Default

    Let me know man. id like it gone!
    http://i682.photobucket.com/albums/vv181/driftkulture/lavivahate.jpg

  17. #17
    Local Outcast Beau's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Australia
    Posts
    1,264

    Default

    BUMP up the JAM
    http://i682.photobucket.com/albums/vv181/driftkulture/lavivahate.jpg

  18. #18
    Local Outcast Beau's Avatar
    Join Date
    Dec 2008
    Location
    Sydney, Australia
    Posts
    1,264

    Default

    Cant understand why this hasnt sold. No Rust no damage. Cost fuck all to finish and it will have great bits in it.. SOFT!

    BUY!
    http://i682.photobucket.com/albums/vv181/driftkulture/lavivahate.jpg

  19. #19
    Its business as usual! MeZ Prod's Avatar
    Join Date
    Dec 2008
    Posts
    196

    Default

    because deep down your saving it for me. llol

  20. #20
    Senior Member Faceplant456's Avatar
    Join Date
    Jul 2009
    Location
    Brightwaters , NSW
    Posts
    868

    Default

    its a nice deal, if i hadn't bought my one and i had saw this i would buy it. GL with the sale.
    My AE86 ... Built Not Bought! : http://www.ae86drivingclub.com.au/fo...ead.php?t=8965


    Need Tyres? PM me for Kumho's
    Need a Mechanic? PM me Located around the central coast (NSW), with a specialty for the 4A-GE engine in all of its forms.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts