Results 1 to 9 of 9

Thread: COMPLETE driveline package for 86... NA styles.

  1. #1
    Veteran Touge Boy's Avatar
    Join Date
    Mar 2009
    Name
    Ben
    State
    SA
    Location
    Modbury
    Country
    Australia
    Posts
    1,484

    Default COMPLETE driveline package for 86... NA styles.

    Im looking at getting a 3SGE engine setup,so im putting my entire driveline up for sale.

    Rebuilt 4age smallport engine, 10,000kms on the engine, balanced rotating assembly etc, but requires new rings. Drives as it is, but has some blow-by. Made 80kw's in it's current state, conservative tune with base timing and cams @ 0. Car was tuned by Shaun @ Boostworx.
    Bigport head, slight porting, heavier valve springs, TRD 0.8mm head gasket
    TODA 288 8.5mm lift cams in/ex with HKS adjustable cam gears, HKS timing belt
    20v silvertop quad throttles and 75mm trumpets on T3 adapter plate with 4AGZE injectors in billet fuel rail
    TRD extractors with 2.25 inch straight through exhaust
    ADAPTRONIC ECU with full loom and Denzo individual coils
    JDM T50 gearbox with HD clutch and 20V lightened flywheel
    JDM Tailshaft
    T-Series disc rear end,with TRD 2way L.S.D and 4.11 gearset

    Also will be selling with it..

    JDM EFI fuel tank with Walbro fuel pump thats done less than 3 hours work
    SARD Adj. Fuel pressure regulator
    Racespec solid engine mounts
    Brand new AJPS JDM traction brackets
    JDM Radiator and hoses
    oil cooler kit

    I want $5K for the lot... rough pricing from above is over $6500.....



    Buy it, re-ring the motor for under $1K, put it all in and enjoy life. Everything is still in the car, and can be driven right now.

    DO NOT ASK ME TO SEPERATE!. I will say when Im separating parts if I have no luck, but really want to sell it all as a complete package at the moment

    Car is located in Modbury, SA, not really keen on sending so much gear interstate, but will if the cash is right.

    Ring Ben on 0430 395 819, reply here or PM me.
    Last edited by Touge Boy; 27th September 2009 at 02:26 PM.

  2. #2
    Veteran MINIHORSE's Avatar
    Join Date
    Jan 2009
    Name
    Felix
    State
    SA
    Location
    Inglewood
    Country
    Australia
    Posts
    2,150

    Default

    Separate T3 plate!!

  3. #3
    Veteran DAMO46's Avatar
    Join Date
    Jun 2009
    Name
    Damian
    State
    NSW
    Location
    Sydney
    Country
    Australia
    Posts
    1,004

    Default

    ill take the cams gears and shafts if you split

  4. #4
    Veteran Touge Boy's Avatar
    Join Date
    Mar 2009
    Name
    Ben
    State
    SA
    Location
    Modbury
    Country
    Australia
    Posts
    1,484

    Default

    I wont seperate it. If I cant sell it all, Il re-ring the motor and continue with that.

  5. #5
    Veteran MINIHORSE's Avatar
    Join Date
    Jan 2009
    Name
    Felix
    State
    SA
    Location
    Inglewood
    Country
    Australia
    Posts
    2,150

    Default

    So.......Um T3 Plate??

  6. #6
    Veteran
    Join Date
    Dec 2008
    Name
    Ben
    State
    SA
    Location
    Ridgehaven
    Country
    Australia
    Posts
    2,866

    Default

    (If you do end up seperating I would be keen for hd clutch and flywheel)

  7. #7
    Veteran Touge Boy's Avatar
    Join Date
    Mar 2009
    Name
    Ben
    State
    SA
    Location
    Modbury
    Country
    Australia
    Posts
    1,484

    Default

    See above. If I cant sell it all in one hit Ill leave it where it is.

    Only way ill seperate the lot is if I have buyers for 90% of it all, especially the motor/gearbox and the diff if im going to tear the engine down i may as well re-ring it and keep using it.

  8. #8
    Member
    Join Date
    Jun 2009
    Name
    Christon
    State
    NSW
    Location
    Liverpool
    Country
    Australia
    Posts
    95

    Default

    i wish i had the dosh for this

  9. #9
    Veteran Touge Boy's Avatar
    Join Date
    Mar 2009
    Name
    Ben
    State
    SA
    Location
    Modbury
    Country
    Australia
    Posts
    1,484

    Default

    If someone wants to make an offer for the complete engine (Block/head/cams/cam gears/throttles/head gasket/headers etc, basically full engine package minus ECU.) I might be interested...

    Ive found a VERY low km 20V blacktop stuffed away out the back of an importer and Id be keen to stick that in if I can get the cash for it, but Beams engine is still on the table.

    Ill probably be replacing the clutch and flywheel when the motor is out regardless, so ill let you know when the time comes if you're still keen?
    Last edited by Touge Boy; 27th September 2009 at 03:35 PM.

Similar Threads

  1. [NSW] CA18DET engine/driveline package $1500neg
    By trdee in forum Car Parts For Sale
    Replies: 7
    Last Post: 1st June 2011, 06:28 PM
  2. JDM 4age bigport package + driveline setup
    By HiroshiFumi in forum Car Parts For Sale
    Replies: 3
    Last Post: 23rd May 2011, 01:16 PM
  3. complete driveline out of a KE70
    By J0RD0 in forum Car Parts For Sale
    Replies: 1
    Last Post: 5th September 2010, 09:40 AM
  4. na na na na na na na na na BATLEB!
    By snake in forum Offtopic Discussions
    Replies: 17
    Last Post: 8th November 2007, 10:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •