as the title, would like 2-3inch lowering blocks for a 83 ke70 wagon. Not sure of the pin size. Must come with U-bolts
Got 2", name your price including post. Threads on U-bolts will need a die run down them, and I think some nuts are missing. Fine thread pitch on the u-bolts so I can't do it for you before sending as I only have coarse thread taps and dies at work. Guide pins are slightly flogged out as the guy i bought 'em off must have been getting a bit of axle tramp. Can send you a pic if you want.
I just ordered some from autobarn for my KE pano brand new $73, I did need to give them all the details as I had measured up under the car.
Part no. LBTOY50 (2" block)
Guide pin = 19mm
They offered me either 75mm U bolts or 65mm so I ordered the kit with 65, I'll probably need to drill out the holes in the bottom plate where the shock mounts to as they suit a 10mm thread and the U bolts in this kit are 12mm (which I'm happy about). I may need to heat up and slightly bend the U bolts to fit snug over the diff too as it's not 65mm diameter only 60.5mm.