Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: 4AGZE front mount cooler

  1. #1
    Senior Member PRIMRK's Avatar
    Join Date
    Dec 2009
    Name
    Cameron
    State
    VIC
    Location
    Brighton
    Country
    Australia
    Posts
    673

    Default 4AGZE front mount cooler

    Hey All,

    Been trying to figure out how to plumb in a front mount intercooler on a 4AGZE?!?

    Currently it has the stock top mount and all plumbing for it, thing is that most of this plumbing is cast large parts that aint very flexable as far as seting up with a front mount.

    Can you get front mount kits that have parts that will point in a general forward direction?

    If anyone has a supercharged 4AGZE in their AE86 post a pic or 2 how you have plumbed intercoolers in, im just not sure how the hell im goin to do it when looking at where the stock pipes are directed (i know i could just redirect them but i want it looking neat as possible)

    Cheers!

  2. #2
    todd
    Guest

    Default

    don't mean to blow my own horn, but do it like this:







    that is all.
    Last edited by todd; 10th December 2009 at 10:13 PM.

  3. #3
    Senior Member PRIMRK's Avatar
    Join Date
    Dec 2009
    Name
    Cameron
    State
    VIC
    Location
    Brighton
    Country
    Australia
    Posts
    673

    Default

    ...ummm your photos didnt work for me...your horn dont work too good...

  4. #4
    todd
    Guest

    Default

    its edited and all fixed. try again.

  5. #5
    Veteran slide86's Avatar
    Join Date
    Nov 2008
    Name
    Huw
    State
    SA
    Location
    Hills
    Country
    Australia
    Posts
    3,526

    Default

    works fine for me.

    todd, i gather the inlet and outlet on that cooler are seperated internally in the end tank?
    where did you get that one from and boost level please?

    many thanks

  6. #6
    Senior Member PRIMRK's Avatar
    Join Date
    Dec 2009
    Name
    Cameron
    State
    VIC
    Location
    Brighton
    Country
    Australia
    Posts
    673

    Default

    ok 4 of em working now...at least its giving me an idea...sorta

  7. #7
    todd
    Guest

    Default

    yeah there is an internal divide between the two entry/exit points so it uses the furthest/most efficient route to cool ze air.
    got it from just jap believe it or not. works well, never had a problem with it.
    280x300x90 or something from memory. trying to keep the core size/pipework and small as really necessary to maintain response from the SC and keep a steady idle.
    on a good night im getting 12psi through the cooler.

  8. #8
    Veteran slide86's Avatar
    Join Date
    Nov 2008
    Name
    Huw
    State
    SA
    Location
    Hills
    Country
    Australia
    Posts
    3,526

    Default

    with 175mm pulley on the crank?

  9. #9
    todd
    Guest

    Default

    cant remember the size exactly, but its not standard sorry cant help u there haha

  10. #10
    Senior Member
    Join Date
    Dec 2008
    Name
    Timmy D
    State
    SA
    Location
    North
    Country
    Australia
    Posts
    799

    Default

    you will need to make a new manifold for the sc pointing towards the front of the car, then make you own custom piping. dont use any of the standard piping as it will just look tacky.



    you can just see the sc piping pointing forward



    then threw the intercooler and back up over the motor to the inlet



    those are the only pics i have to explain it sorry.

    as todd said keep the piping to 2 inch and as short as posible. and dont put a huge intercooler as this also will create a huge flat spot.

    has any one ever looked into a ba falcon intercooler? i think they have the inlet and outlet on the same side? might be a good option
    JJ
    "my mind demands side pipes out of hear, now to command my hands to make them"

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Replies: 3
    Last Post: 23rd May 2011, 08:34 PM
  2. loking for small front mount cooler in melb
    By srae86 in forum Cars or Parts Wanted
    Replies: 2
    Last Post: 10th September 2010, 09:36 PM
  3. Front mount setup for ae86 4agze
    By Evan in forum Car Parts For Sale
    Replies: 0
    Last Post: 25th May 2009, 06:16 PM
  4. front mount cooler
    By pen15 in forum Car Parts For Sale
    Replies: 2
    Last Post: 17th February 2009, 07:48 PM
  5. fs: fmic, front mount cooler 600X300X80
    By ONI86 in forum Car Parts For Sale
    Replies: 0
    Last Post: 25th June 2007, 01:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •