Had a look at putting a sprinter one in my KE panelvan. They looked quite different in the bends, so I would say no (plus I then realised mine was probably stronger anyway). However I didnt actually pull them out so I cant be 100% sure.
Does a KE70/AE71 front anti-roll bar fit a AE86? If so, the fatter bars from a KE70 wagon or van would fit a AE86. Anyone?
Had a look at putting a sprinter one in my KE panelvan. They looked quite different in the bends, so I would say no (plus I then realised mine was probably stronger anyway). However I didnt actually pull them out so I cant be 100% sure.
i have an ae86 one in my KE70 if that helps
Whats the diameter of them?
strange, i would have said yes.. same lca? and i would have guessed same tension arm? if thats the same the other stuff should be, except maybe the brackets, as the ends of the chassis rails and tie rails to appear difference (but may be dimensionally the same).
ill admit im guessing though.
marvis: not overly sure, if i had my car here i would go measure it
I have a set of sway bars and a panhard rod here from an adm ae86 if you wanna buy the front sway bar.
Front sway bars:
AE86 21mm
AE85 20mm
KE70/AE71 wagon 22mm
KE70/AE71 van 23mm