Page 1 of 20 1 2 3 4 5 6 7 8 9 10 11 ... LastLast
Results 1 to 10 of 199

Thread: ill-minded's L70/L80 Mira

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member ill-minded's Avatar
    Join Date
    Oct 2009
    Name
    Ian
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    591

    Default ill-minded's L70/L80 Mira

    So at the start of the year, I took delivery of this little beast for a meagre sum as a project to keep me occupied in my free time while I'm not at uni or working on assignments, or just generally bludging. The basic rundown is that it's an Australian L80 Handivan, which is essentially the same as the Japanese L70V with the exception of being powered by an 850cc motor instead of a 550cc turbo motor. There are a few other subtle differences, but for the most part, they're the same car.



    This particular vehicle was originally found as an old customer courtesy car for a car audio workshop in Moorooka, where I first saw it. At the time, I was as poor as most uni students are and let it slide, but told John (xsoarerx) about it, who later bought it and stashed it under his house for some months. Late last year, he offered it back to me, so I found a bit of spare change and it became mine

    Upon getting it back to my residence, I checked over most of the car to suss out what would be needing repairs or replacement. I already knew the motor was pretty much cactus, but went about listing the other bits that needed attention. Main issues are:
    - Dead motor
    - Rust in roof/windscreen surround
    - Crack in windscreen
    - Busted tail light
    - Steering column surround busted
    - Mismatched/worn tyres
    - Drivers door sagging

    So, the process of stripping it out to begin repairs began...





    Some of the bad patches of rust





    And that's about as far as i've gotten over the past couple of weeks. Currently waiting to pull the motor and gearbox out, remove the windscreen and get the rust tended to.

    Initial plans are to just get it running and registered, then lower it, find some wheels (110PCD ) and maybe look at a cheap respray. Funtimes!
    Last edited by ill-minded; 3rd March 2010 at 02:29 AM.

  2. #2
    Veteran
    Join Date
    Dec 2008
    Name
    Aaron
    State
    TAS
    Location
    In the Mountains
    Country
    Australia
    Posts
    2,518

    Default

    kei sized cars seem to becoming way more popular!!

  3. #3
    Banned
    Join Date
    Oct 2009
    Posts
    1,283

    Default

    good on ya for being different. Myself i cant justify spending time and money on that when there are but things out there for a project car. but i know u will prove me wrong

  4. #4
    Senior Member ill-minded's Avatar
    Join Date
    Oct 2009
    Name
    Ian
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    591

    Default

    thanks it'll probably be a long journey (full of expletives) till it's finished, but it should be fairly rewarding in the end i think.

  5. #5
    Senior Member ill-minded's Avatar
    Join Date
    Oct 2009
    Name
    Ian
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    591

    Default

    so i uhh... accidentally



    ... the whole windscreen :\

    was poking around trying to get rust converter onto the areas around the windscreen and sorta worked out how to pop out the windscreen without it blowing up into 7 million shards in my face. half an hour later and it popped out quite easily and so i was like

    ... then i saw the extent of the cancer and was like





    the top of the passenger side will definitely need welding, and the other bits around the bottom will probably end up getting similar treatment, but could probably do without. i'd rather not have to pull out the windscreen later to fix it, so i'll try and get it done properly too.

  6. #6
    Senior Member ill-minded's Avatar
    Join Date
    Oct 2009
    Name
    Ian
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    591

    Default

    finished pulling out the dash today to remove the sound deadener against the firewall and clean out the 24 years of shit accumulated. fairly sure the windscreen has been smashed in this car at some other point in its life, as i found a few little chunks up behind the dash.




    engine waiting to be pulled. looks rather bare

  7. #7
    Senior Member ill-minded's Avatar
    Join Date
    Oct 2009
    Name
    Ian
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    591

    Default

    Been doing a bit of research around on motors and by the looks of it, I should be able to stick a 12 valve head from an L200 onto this without any dramas, which is pleasing, cause the standard 6 valve jobbie is pretty meh. still yet to decide exactly what i want to do with the motor, but running some bike carbs and fabbing an exhaust for it seems to be winning at the moment. should have a bit more poke than the standard motor and probably sound a whole heap nicer as well in other news, i'm waiting on delivery of a block and tackle to remove the motor, where i'll pull the head off and gauge how rooted it is exactly.

    also pulled the window and winder mechanism out of the driver's door to check if i can replace the winder mechanisms with L200 items cause the splines on the winders have been stripped off from the numerous drivers/owners beforehand. L200 seems like it'll fit, so i'll add that to the list of things to grab next time i visit the wreckers.

  8. #8
    Veteran Pidgey's Avatar
    Join Date
    Sep 2009
    Name
    Ry
    State
    QLD
    Location
    Sunshine Coast
    Country
    Australia
    Posts
    1,630

    Default

    Do bike carbs. Please do bike carbs.
    [SIGPIC][/SIGPIC]
    Quote Originally Posted by Jacobxxx View Post
    I will legitimately drive nude...

  9. #9
    Senior Member ill-minded's Avatar
    Join Date
    Oct 2009
    Name
    Ian
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    591

    Default

    if i have my way, bike carbs will be done

    spent the past 3 or so hours pulling the motor out

    heavy little bastard to lift, even with the block and tackle. all went fairly painlessly (other than the rope raping my hands). forgot about the gearbox oil though, and it poured out through the driveshaft holes

    anyway, pics



    tiny clutch is tiny. about 160mm diameter

    fucked mount is fucked.


  10. #10
    Senior Member ill-minded's Avatar
    Join Date
    Oct 2009
    Name
    Ian
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    591

    Default

    so i was looking around for a piece of steel plate to pull off the crank pulley, and our neighbour came over and offered the use of a crank pulley puller thing. turns out they're old mechanics and they have a whole shed full of tools which they said i was more than welcome to use. the also have a welder, which will prove handy later down the track when i go to fix the rust

    so, crank pulley is off and i'll look into pulling the head off tomorrow. win!

Page 1 of 20 1 2 3 4 5 6 7 8 9 10 11 ... LastLast

Similar Threads

  1. ill-minded's RA65
    By ill-minded in forum Other Toyotas
    Replies: 200
    Last Post: 10th March 2016, 10:49 PM
  2. crazy 86 lover not to mechanicly minded help plz
    By dtp05 in forum Technical - Questions
    Replies: 31
    Last Post: 4th May 2009, 09:39 PM
  3. Replies: 4
    Last Post: 27th February 2008, 07:53 PM
  4. ill draw your car
    By HiLtOn in forum Toyotas in the Media
    Replies: 45
    Last Post: 2nd May 2007, 04:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •