Car - JDM AE86
motor - Blacktop 20v AE111
problem - The car just keeps on kicking over but doesnt want to start. There is spark, though maybe no fuel?
occurs/started when - Well i took the AE92 Smallport engine out of the car after i owned it for a couple months and decided to take the 20v option. The car was previously running before i decided to do the conversion.
So basically the 20v is wired up to a Adaptronic loom and ecu, (done by ant) the engine is in, wired up with the JDM loom but i cant get it to start.(just keeps kicking over)
Some people have suggested the FCOR but i cannot find the FCOR, maybe as the previous owner took out the bigport and went with the smallport option so maybe bypassed it somehow?
Any help would be appreciated.
Cheers
Last edited by Sam-Q; 6th March 2010 at 12:48 AM.
1> Is everything powered up with key on? (ECU, injectors, coilpacks, COR)
2> Is everything powered up with key in START position? (as above)
3> can you hear the pump prime for 3 seconds when you turn the key on?
4> Assuming the pump is audibly priming, is fuel pressure making it to the engine?
They're the basic checks, beyond that it's best to get a laptop plugged in and check stuff like cranking RPM and sensor values from the ECU's point of view. Just PM me if you need any other help.