reviving my dead thread the car is running the RB25DE with ITB's it sat in a shed for many moons but has come back to life and has been tuned and runs once again so she can be ready for sale.
new update spec list here
- autech kit, skirts, front and rear bar
- d max roof lip
- d max boot lip
- vented bonnet ( not sure on the make ) ( not fitted at the moment still has standard on )
- wantanabe 15x8 front 16x9 rear ( i think, i have to check )
- s13 sr20det front brakes
- r33 rear brakes
- Nismo 2 way ( rebuilt 3 way adjustable one )
- PBM (part shop max) adjustable toe rod, traction rod, camber arms rear.
- HSD coil overs 8-10kg
- PBM (part shop max) subframe collars
- basic rear strut brace
- ultra racing front strut brace
- bolt in cusco cage fit a31 c33 ( sand blasted and repainted )
- ikeya formula tierods
- tie rod ends KTS
- modified crossmember for rack to be moved forward for the knuckles
- Custom knuckles ( purchased from JDM garage )
- rack spacers
- braided brake lines
- urethane rack bushing
- white line rear sway bar uprated
- urethane sway bar bushings
- gtr front driver and passenger seats
- nardi classic
- defi gauges, vacuum, oil temp, Water temp.


Engine, trans


- head has massive porting as big as we could take it both inlet and exhaust have pictures of the porting
- HKS step 2 RB26 cams as big as we could fit without grinding the head for more space.
- uprated valve springs
- adjustable cam gears
- bosch 250 fuel pump
- custom made RB26 throttle bodies ( engineered for correct length and tuning)
- vacuum block
- r33 radiator
- alloy swirl pot
- HPC coated custom fabricated extractors
- full stainless custom fabricated and tucked 2.5" exhaust
- titanium exhaust tip
- exedy Heavy Duty clutch ( racing variant i think i can't remember )
- running on a link g3+ with adapter plug and play.


it is currently tuned by godzilla motorsport conservatively at 164whp i have the printout in the car will upload if you want to see but numbers are numbers.

the video is old! before i bought the link g3+ and cleaned up the engine bay and wiring. i don't have any pictures of the body yet but will upload soon.