Page 8 of 28 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ... LastLast
Results 71 to 80 of 277

Thread: Tas Ae86's - Trueno Track/Drift Car Build

  1. #71
    Senior Member
    Join Date
    May 2009
    Name
    Brodie
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    138

    Default

    Yeah F#$@ it, I will just do that instead of pissing around. He said to put black plastic over it and let it warm up then weld/ let cool/ weld/ let cool x1000....... lol
    Last edited by Tas AE86; 24th June 2010 at 09:46 PM.

  2. #72
    Senior Member
    Join Date
    May 2009
    Name
    Brodie
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    138

    Default

    Cheers man, you were goin sick at the prac day, I kept spinning in front of you and fooking your runs up. Yeah still got the axles and centre, you can have them if you want? Can bring them to round 3, Was only going to chuck them away anyway.

  3. #73
    Senior Member
    Join Date
    May 2009
    Name
    Brodie
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    138

    Default

    Welded my equal length box sections in over the weekend, and sat the kit on to give me a bit of inspiration to work on it in the tassie winter....
    Also started sectioning out the firewall for the pedal box master cylinders but ran out of welding gas.



    note the RHS is just tacked on to keep the boxes square while I welded them in.






  4. #74
    Senior Member klusio's Avatar
    Join Date
    Dec 2008
    Name
    Kieran
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    440

    Default

    looks sweet Im keen to do some work on mine when I get back, I can relate to the cool nights in
    the shed lol
    Cheers Kieran

    Thanks to: Az & me - Azcustom
    John - Davidson Autobody
    Matt - Tasmanian Engine Reconditioning
    Tobias - Koolstik Signs

    4AGTE Powerd AE86 Tassie Spec Build Thread

  5. #75
    Senior Member
    Join Date
    May 2009
    Name
    Brodie
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    138

    Default

    Sweet, get that thing up and running, cant wait to see it in the flesh

    Havn't done much to the sprinter lately because I've been driving the 180 a fair bit. But have finished sectioning out the floor for the pedal box and mounted it, started on the hydro handbrake and mounted the intercooler. The middle master cylinder goes in between the chassis rail, and there's two sections each side of that because I didn't want cut the rail to much.









  6. #76
    Bad Email Address
    Join Date
    Mar 2010
    Name
    Sean
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    253

    Default

    nice work with the peddles havnt seen them in a 86 before

  7. #77
    Senior Member
    Join Date
    May 2009
    Name
    Brodie
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    138

    Default

    the N2 Ae86 from NZ uses them aswell I think

  8. #78
    Veteran
    Join Date
    Dec 2008
    Name
    John
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,200

    Default

    josh young ran a pedal box in his pink/red hatch

  9. #79
    Bad Email Address
    Join Date
    Mar 2010
    Name
    Sean
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    253

    Default

    oh haha guess i havnt been taking notice lol

  10. #80
    Senior Member plohl's Avatar
    Join Date
    Mar 2010
    Name
    Shane
    State
    QLD
    Location
    Carseldine
    Country
    Australia
    Posts
    452

    Default

    Is the peddle box from demon tweaks? I think we got the same one for a little racer - not impressed with it, but leave someone useless in charge and that’s what you get. The accelerator isn't in double sheer and bends like fuck, you really need a stop at the peddle and to weld a gusset or something on to it. We welded a little bit of steel to the top to stiffen it up (see attached), but ideally you want to add another side and put the accelerator pedal in double shear.




    It an awesome build! I wish this sort of shit was happening when I was in Tassie!
    Cheers, plohl

Page 8 of 28 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ... LastLast

Similar Threads

  1. Trueno street/track 3SGTE build
    By devil_86 in forum AE86 Owners Forums
    Replies: 20
    Last Post: 26th September 2014, 10:32 AM
  2. 4agte ae86 drift/track car part out
    By _wanna-be_ in forum Car Parts For Sale
    Replies: 9
    Last Post: 7th November 2012, 08:29 PM
  3. Just JDM Imports Track Car Build
    By 44GTE in forum AE86 Owners Forums
    Replies: 18
    Last Post: 24th July 2012, 11:00 AM
  4. KE70 Drift/Track Car Build.
    By luke641 in forum KE70 / AE71 Owners Forums
    Replies: 38
    Last Post: 19th March 2012, 06:50 PM
  5. SRE70 Track Car Build up
    By chrizer in forum KE70 / AE71 Owners Forums
    Replies: 37
    Last Post: 2nd June 2008, 01:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •