Results 1 to 8 of 8

Thread: 3 mandrel bent exhaust

  1. #1
    Senior Member
    Join Date
    Jan 2009
    Name
    Paul
    State
    NSW
    Location
    Sydney
    Country
    Australia
    Posts
    266

    Default 3" mandrel bent exhaust


    TO REMOVE ADS, PLEASE
    REGISTER OR SIGN IN
    I have been building my car up of the last couple of years now and there are a couple of things that I have done with regards to mods early in the build that are now a little over the top. One of them is the 3" mandrel bend exhaust that I have on the car. The exhuast comes with a Hooker Aero Chamber muffler that is pretty much straight through and it the complete exhaust from basicall the base of the fire wall to the rear of the car. This would be well suited to a high power turbo application I have got photos of the exhaust in the build thread but I won't have proper photos until I have got the new 2.5" system fitted up.

    http://www.ae86drivingclub.com.au/fo...ead.php?t=1253

    Cost wise I am thinking around $250 for just the pipe work or $350 with the rear muffler (which is worth $250 just by itself) All this stuff it pretty much brand new as the car has never been driven and only run for maybe a total of 2 hours since it was fitted. Happy to post anywhere are the buyers expense.

    Cheers
    Paul

  • #2
    Junior Member
    Join Date
    Dec 2008
    Name
    Abdul
    State
    NSW
    Location
    Liverpool
    Country
    Australia
    Posts
    17

    Default Exhaust

    Hi there,I have built many 4AGTE's before and always used 3" and never had a problem(with a catalytic converter).Just thought id share my experiences.

  • #3
    Veteran evil86's Avatar
    Join Date
    Dec 2008
    Name
    Phuoc
    State
    NSW
    Location
    Liverpool
    Country
    Australia
    Posts
    1,137

    Default

    id love it but in syd

  • #4
    Senior Member
    Join Date
    Jan 2009
    Name
    Paul
    State
    NSW
    Location
    Sydney
    Country
    Australia
    Posts
    266

    Default

    I realise that it won't be a massive problem but I just don't need it and I will have more clearance all round if I go with a 2.5" system. I am only running a 2.5" dump pipe as well so not really needed. I am only going to be running around 140rwkw through my setup at the most so it was over kill.

    Cheers
    Paul

  • #5
    Senior Member
    Join Date
    Jan 2009
    Name
    Paul
    State
    NSW
    Location
    Sydney
    Country
    Australia
    Posts
    266

    Default

    Yeah it is not going to be very police friendly I am afraid without another muffler fitted, it certainly flows well though

  • #6
    Junior Member
    Join Date
    Dec 2008
    Name
    Abdul
    State
    NSW
    Location
    Liverpool
    Country
    Australia
    Posts
    17

    Default

    Fair enough.My 3" exhaust cost me $750 without the muffler,so anyone who wants a bargain exhaust this is it guys.

  • #7
    Veteran evil86's Avatar
    Join Date
    Dec 2008
    Name
    Phuoc
    State
    NSW
    Location
    Liverpool
    Country
    Australia
    Posts
    1,137

    Default

    any ideas of transporting this to syd. im driving down to melb at the end of march for holidays, dont know if its a wise idea to put it in the car or not

  • #8
    Senior Member
    Join Date
    Jan 2009
    Name
    Paul
    State
    NSW
    Location
    Sydney
    Country
    Australia
    Posts
    266

    Default


    TO REMOVE ADS, PLEASE
    REGISTER OR SIGN IN
    Cost wise I am not too sure, it will unbolt and fit in your car just fine though. when are you coming through could be a cheap option. I should have it out next week so I can take some proper photos then and measure it up for postage. It wouldn't be more than $100 to send though I don't think but the muffler is pretty heavy.

    Cheers
    Paul

  • Similar Threads

    1. S/S 3 MANDREL BENDS F/S QLD $25 ea
      By J0RD0 in forum Car Parts For Sale
      Replies: 0
      Last Post: 5th November 2010, 09:59 AM
    2. Replies: 17
      Last Post: 24th October 2010, 09:06 AM
    3. turbo exhaust manifold with gate and ful 3 exhaust
      By Nic19 in forum Car Parts For Sale
      Replies: 10
      Last Post: 24th April 2010, 04:53 PM
    4. Exhausts (mandrel bent vs press bent)
      By RZA12 in forum Technical - Questions
      Replies: 21
      Last Post: 19th October 2007, 08:34 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •