Page 5 of 40 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ... LastLast
Results 41 to 50 of 400

Thread: Universal 3sge (inc Beams) into AE/KE thread

  1. #41
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default



    Yeah any altezza clutch kit, oem or aftermarket has the bearing in the flywheel. Also, other RWD later model S motors have it in the flywheel as well, like 3/4SFE from cressida's and townace vans. These are 8 bolt as well, although not the correct hole size or PCD for beams 3SGE's, they can be modified to work.
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  2. #42
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default



    On either the Y or S bellhousing you can use a double row spigot bearing which will support the input shaft just fine.
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  3. #43
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default



    Where is the clutch/starter located on the 2s bellhousing?
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  4. #44
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default



    S has them both on the passenger (exhaust) side, Y has them both on the drivers side.

    The reason I prefer the altezz clutch kit idea over the double row spigot bearing is that it solves a few of the big 3S RWD headaches all at once. Namely, bearing, flywheel, ring gear and clutch.
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  5. #45
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default



    Anthony do you have a certain starter motor that you use for the 3y bellhousing? I wouldn't imagine that the original one from the 6 speed fits
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  6. #46
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default



    3S FWD one fits im pretty sure.
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  7. #47
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default



    ANDY... hav a look a roidchikens thread... good starter solution.... brad is a clever lil boy

    the problem we found was getting one to clear the stearing.... with the 3y bell the starter is rotated much further around the bell than the original 6 speed...

    brad made a spacer to mount a 22re i think it was... worked purfect.

    the beams clutch and flywheel kit is a great solution dont see muc need to fuck about with other stuff.

    the back of the engine i went with was

    3y bell modified by ant
    altezza trd clutch and flywheel
    3y clutch fork and clutch slave
    w57
    22re starter with bradspec mount

    hth
    even for a muppet like me it all bolted up and worked.
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  8. #48
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default



    What gets modded on the bellhousing?
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  9. #49
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default



    One of the top bell housing to block 12mm bolt holes is out by about 15mm. The other 3 and both dowels are fine, just that one hole. Worth it to get the clutch and starter on the drivers side.
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  10. #50
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default




    indeed

    you ever end up doing those modified 20v starters?
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

Page 5 of 40 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ... LastLast

Similar Threads

  1. What did you do on your ae/ke today thread
    By dove grey 64 in forum Melbourne & Vic Events and Discussion
    Replies: 329
    Last Post: 19th December 2013, 01:49 PM
  2. 3SGE Beams
    By Jacobxxx in forum Ebay Items - My Stuff
    Replies: 1
    Last Post: 29th October 2012, 12:03 PM
  3. 3sge Beams Coilpack
    By HiroshiFumi in forum Cars or Parts Wanted
    Replies: 2
    Last Post: 14th January 2012, 06:33 PM
  4. Replies: 12
    Last Post: 29th November 2010, 09:00 AM
  5. beams 3SGE questions
    By ke_70 in forum Technical - Questions
    Replies: 6
    Last Post: 22nd May 2009, 07:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •