Page 6 of 40 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ... LastLast
Results 51 to 60 of 400

Thread: Universal 3sge (inc Beams) into AE/KE thread

  1. #51
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default



    Definately. The 2s one wouldn't work with a beams anyway as the starter would be right in the way of the oil drain.
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  2. #52
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default



    I found 2 20V starters which I have here. Just no bell housings around to set the job up with. Sold them all. Easy enough job though, if anyone needs a bell housing modified with a modded starter to go with it I could do that.
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  3. #53
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default



    so andy when you set this up for ipra it might pay you to get a racing clutch ,like a 5inch dia . i seem to be braking straps all of the time
    and if you saw what i put up you are not aloud to cut the tunnel at all only love taps same for the fire wall
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  4. #54
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    hey can someone post a pic of how the 3S beams sump fits in relation to the steering rack and crossmember?
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  5. #55
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    now with this has all been coppied to here this is open for further discussion.

    Here is a new question for you guys, whats the big deal about the oil return in the way? I mean why not make a new one that goes around the starter? Without me ever seeing one I don't know what the deal is
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  6. #56
    Banned
    Join Date
    Jun 2010
    Posts
    33

    Default

    with the way my mounts are going to sit i have to cut some of the sump webbing just near the bellhousing. this is to clear the steering rack brackets



    sorry about the crappy red lines but you get the idea

    this is with the beams version. the motor will sit under the seam on the firewall. so this is if you want it as low and far back as possable. you will most probley (6sp defenently) need a new tunnel and bash plate if you go to this extreme


    who knows alittle more about the quads convertion for beams? throttle setup most specificly
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	SNC00094..jpg 
Views:	983 
Size:	85.0 KB 
ID:	11892  
    Last edited by twisted; 28th June 2010 at 10:35 PM.

  7. #57
    Senior Member
    Join Date
    Dec 2008
    Name
    Glenn
    State
    VIC
    Location
    North Ringwood
    Country
    Australia
    Posts
    559

    Default

    you need to run black top throttles as a minimum or larger such as up to 50mm
    Last edited by Sam-Q; 31st July 2014 at 02:16 AM.

  8. #58
    Veteran AJPS's Avatar
    Join Date
    Nov 2008
    Name
    David
    State
    SA
    Location
    Lonsdale
    Country
    Australia
    Posts
    4,245

    Default

    So glen, im going to run cams in my motor 268s, will i need to go bigger than black top quads? What do you suggest?

  9. #59
    Senior Member
    Join Date
    Dec 2008
    Name
    Glenn
    State
    VIC
    Location
    North Ringwood
    Country
    Australia
    Posts
    559

    Default

    so you are going to use the toda cams, that can use the std ecu, 268 on inlet and 264 on exhaust .
    std cam is 264 on inlet so you are not going up much so the black tops will be fine
    its when you increase lift .like 14mm and more duration like 320 advertised and 266 at 50 would be better off with bigger throttles and more comp etc

  10. #60
    Veteran AJPS's Avatar
    Join Date
    Nov 2008
    Name
    David
    State
    SA
    Location
    Lonsdale
    Country
    Australia
    Posts
    4,245

    Default

    I was going to use thinner headgasket etc,

    what options are there for bigger quads? As in that have adapters available

    Ill take it to pm

Page 6 of 40 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ... LastLast

Similar Threads

  1. What did you do on your ae/ke today thread
    By dove grey 64 in forum Melbourne & Vic Events and Discussion
    Replies: 329
    Last Post: 19th December 2013, 01:49 PM
  2. 3SGE Beams
    By Jacobxxx in forum Ebay Items - My Stuff
    Replies: 1
    Last Post: 29th October 2012, 12:03 PM
  3. 3sge Beams Coilpack
    By HiroshiFumi in forum Cars or Parts Wanted
    Replies: 2
    Last Post: 14th January 2012, 06:33 PM
  4. Replies: 12
    Last Post: 29th November 2010, 09:00 AM
  5. beams 3SGE questions
    By ke_70 in forum Technical - Questions
    Replies: 6
    Last Post: 22nd May 2009, 07:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •