Page 11 of 40 FirstFirst ... 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 ... LastLast
Results 101 to 110 of 400

Thread: Universal 3sge (inc Beams) into AE/KE thread

  1. #101
    Veteran Touge Boy's Avatar
    Join Date
    Mar 2009
    Name
    Ben
    State
    SA
    Location
    Modbury
    Country
    Australia
    Posts
    1,484

    Default

    I have the 6 speed in. result.... new tunnel.





    My engine is almost touching the firewall though. Some mods needed to the sump and crossmember as well to get it as low as possible.
    Member of the Cable-Tie Cartel.

  2. #102
    Glenn ke_70's Avatar
    Join Date
    Dec 2008
    Name
    Clay
    State
    SA
    Location
    Barossa!
    Country
    Australia
    Posts
    5,311

    Default



    the gearbox sits heaps high with how i mounted it
    i also realised you can move the shifter forward soon after cutting out the floor lol

    it is possable to drop our motor position ben by about 30mm atleast. but this would drop the sump like 60mm below the crossmember this would be the way to fit in the standed tunnel.

    there is some one floating around here with the 6sp in the standed tunnel though

  3. #103
    Veteran Touge Boy's Avatar
    Join Date
    Mar 2009
    Name
    Ben
    State
    SA
    Location
    Modbury
    Country
    Australia
    Posts
    1,484

    Default

    Im happy with how mine sits, I kinda wish i'd gone dry-sump so I could use the OEM tunnel, but was kinda happy with the way I went when Andy filled me in on the pricing haha.
    Member of the Cable-Tie Cartel.

  4. #104
    Glenn ke_70's Avatar
    Join Date
    Dec 2008
    Name
    Clay
    State
    SA
    Location
    Barossa!
    Country
    Australia
    Posts
    5,311

    Default

    yeah im going to see if i can raise the steel sump pan up so i can drop the motor abit more. ill have a chat with glen and see what he can do with it.

    that whole section of the rear alloy sump bit (where the webbing was growned away abit) can be growned away flat all together!

  5. #105
    Senior Member 4.5AG's Avatar
    Join Date
    Dec 2008
    Name
    Vener
    State
    NT
    Location
    Lyons
    Country
    Australia
    Posts
    267

    Default

    Any pics of the engine mount and engine cross member.
    I also found out from kelpro catalogue similarly shaped (cylindrical engine mounts) to the 3sge beams that might be smaller in height.
    Toyota Cressida MX83R part no. MT8270
    MT 8007 land cruiser fj40 from 7/80 onwards, rubber only no bolt specs 67mm diameter,30 mm high,and 13 mm diameter of the centre hole for bolt.
    MT8128 peugeot
    MT8149/MT8150 Saab
    MT8136 BMW
    MT8152N Ford 53mm height,70mm diameter, stud/bolt 10mm
    MT8154N jaguar 42 mm h,70mm diameter,stud/bolt 10mm
    MT8155 ford ,cylindrical mount with moulded bracket, 2 bolt holes height from top of bolt to bottom 92mm, diameter 97 mm, height of plate/bracket to top of bolt 75mm MT 8155N urethane
    MT8375 Nissan
    And many more...
    Hope this helps,
    Does anyone know the specs of the STD 3sge mount, height width, etc..
    My engine and gearbox is due to arrive dec from j land. I'll try to gather lots of info and associated parts to fit this engine to my trueno.
    Cheers,
    Vener

  6. #106
    Glenn ke_70's Avatar
    Join Date
    Dec 2008
    Name
    Clay
    State
    SA
    Location
    Barossa!
    Country
    Australia
    Posts
    5,311

    Default

    me and touge boy use the buddyparts ae86>beams engine mounts.

    these are fucking pro as it mounts the motor mm's off the steering rack and the fire wall. its also a good compromise between the sump clearence and engine height. the motor clears the oem bonnet if you cut some the webbing out or just not keep the cover like me.
    these mounts bolt up to a standed ae86(/ae71?) crossmember and even use the standed 4a engine rubber mounts.

    they also do the gearbox crossmember for the 6sp's to but i just made my own.....

  7. #107
    Veteran Touge Boy's Avatar
    Join Date
    Mar 2009
    Name
    Ben
    State
    SA
    Location
    Modbury
    Country
    Australia
    Posts
    1,484

    Default

    That's my crossmember, Ill try to get a good pic of the engine mounts today.

    Member of the Cable-Tie Cartel.

  8. #108
    Senior Member 4.5AG's Avatar
    Join Date
    Dec 2008
    Name
    Vener
    State
    NT
    Location
    Lyons
    Country
    Australia
    Posts
    267

    Default Engine mount pics


    Pics would be appreciated
    Cheers,
    Vener

  9. #109
    Glenn ke_70's Avatar
    Join Date
    Dec 2008
    Name
    Clay
    State
    SA
    Location
    Barossa!
    Country
    Australia
    Posts
    5,311

    Default



  10. #110
    Veteran Andy San's Avatar
    Join Date
    Jan 2009
    Name
    Andy
    State
    SA
    Location
    Adelaide Hills
    Country
    Australia
    Posts
    1,111

    Default

    can I block this off:



    without making something explode/overheat?
    Andy

    Quote Originally Posted by slide86 View Post
    I will however take take the water from the washer bottle posted to a boat in the southern pacific....express please

Page 11 of 40 FirstFirst ... 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 ... LastLast

Similar Threads

  1. What did you do on your ae/ke today thread
    By dove grey 64 in forum Melbourne & Vic Events and Discussion
    Replies: 329
    Last Post: 19th December 2013, 01:49 PM
  2. 3SGE Beams
    By Jacobxxx in forum Ebay Items - My Stuff
    Replies: 1
    Last Post: 29th October 2012, 12:03 PM
  3. 3sge Beams Coilpack
    By HiroshiFumi in forum Cars or Parts Wanted
    Replies: 2
    Last Post: 14th January 2012, 06:33 PM
  4. Replies: 12
    Last Post: 29th November 2010, 09:00 AM
  5. beams 3SGE questions
    By ke_70 in forum Technical - Questions
    Replies: 6
    Last Post: 22nd May 2009, 07:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •