Page 1 of 2 1 2 LastLast
Results 1 to 10 of 22

Thread: Worked 4age 16v Head

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Dec 2008
    Name
    Heath
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    6

    Default Worked 4age 16v Head

    LOADS OF PARTS ADDED!!!


    Hey guys selling my worked head ive had built up as ive got a whole motor package.......

    4age Biport head
    -new trd valve springs
    -new stainless over sized valves
    -bronze guides
    -3 angle valve job
    -massive amount of port work.
    -ivan tighe cams biggest u can run on std shim setup approx 292 8.2mm
    -bead blasted
    -crack tested
    -pressure tested

    Everything is setup ready to bolt onto a motor and make big hp!

    After 2k owes me ALOT more.

    In Tassie and will ship at buyers expense

    pics up asap... can send pics to genuine buyers phones.


    PARTS ADDED BELOW!! PM ME!!!
    Last edited by TUF_086; 1st March 2009 at 05:17 PM.

  2. #2
    Junior Member
    Join Date
    Dec 2008
    Name
    brad
    State
    nsw
    Location
    sutherland
    Country
    australia
    Posts
    28

    Default

    hey mate i might be intersted. can you give me the flow figures on this head. who ported it?

    any chance of some pics of the ports and combustion chamber?

    just curious, would you sell without cams and valve springs?

    brad

  3. #3
    Junior Member
    Join Date
    Dec 2008
    Name
    Heath
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    6

    Default

    Hey dude wanna sell as a whole setup but at the best ill pull the cams out

    Work was done by Mark Steel he does alot of stuff for rally guys i cant find the flow bench results and cant get it redone as hes sold his flow bench due to pple not wanting to fork out the coin to have work done.

    Im posting pics up now he done a shitload of work in the ports relaxing for the oversized valves.....

    The valve grind was finished by hand also.

    New acl valve seals also
    Last edited by TUF_086; 7th February 2009 at 11:30 AM.

  4. #4
    Junior Member
    Join Date
    Dec 2008
    Name
    Heath
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    6

    Default










  5. #5
    Junior Member
    Join Date
    Dec 2008
    Name
    brad
    State
    nsw
    Location
    sutherland
    Country
    australia
    Posts
    28

    Default

    pm'd you.

  6. #6
    Veteran Wally's Avatar
    Join Date
    Dec 2008
    Name
    Chris
    State
    NSW
    Location
    Sydney
    Country
    Australia
    Posts
    1,938

    Default

    fucking tough as.
    1984 JDM Zenki Trueno GT-Apex Hatch
    4AGE 16V
    +Quads, HKS 264 cams, Microtech LT10s, TRD gearset gearbox, TRD2WAY LSD, fun!

    FOR SALE: JDM 4AG PACKAGE+ITEMS (ENGINE/GBOX/EXHAUST/ECU/SHIT)

    http://www.ae86drivingclub.com.au/fo...ad.php?p=15205

  7. #7
    Junior Member
    Join Date
    Dec 2008
    Name
    Heath
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    6

    Default

    Yes and i hope it'll go to someone who will make good use of it!!!

    Now accepting part trades as part payment... i.e hot rims, parts for decent bottom end build, lsd for t series w series box upgrade... and nitrous system...
    Last edited by TUF_086; 7th February 2009 at 02:33 PM.

  8. #8
    Junior Member
    Join Date
    Dec 2008
    Name
    Heath
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    6

    Default

    BUMMP

    Gonna clear out random bits soon gotta round them up various bits from t18 ke70 ae86.....

  9. #9
    Junior Member
    Join Date
    Dec 2008
    Name
    Heath
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    6

    Default

    Bump!

  10. #10
    Junior Member
    Join Date
    Dec 2008
    Name
    Heath
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    6

    Default

    Ok guys just went though some of my shed and heres a few more bits....

    2x ae86 gearbox xmembers
    1x ae86 rack
    1x ke70 rack
    1x excedy heavyduty clutch 500kms old
    1x 4age cas
    1x t18 diff series 2 SOLD
    1x t18 tail SOLD
    1xae86 tail
    1x ke70 auto tail
    2x ae86 gearbox rubber stay bits
    1x ae86 t50 box
    2x t18 boxs one series 1 and 1 series 2
    2x slaves ae86 Unknown condition.
    1x clutch slaves good con
    1x ae86 complete brake master assembly
    1x whiteline centre bit
    1x t18 struts complete
    1x drivers rail modded for bucket
    1x front ae86 swaybar and castor rod setup
    1x t18 motor pakage complete motor
    1x t18 3tc set of extractors and exhaust
    1x ke70 engine xmember modded for 3tc
    1x 4age coil and ignightor


    i have 3 times this many parts to post up every std bit from t18s ae86 and ke70...
    Last edited by TUF_086; 13th March 2009 at 12:29 AM.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. 4age silver top worked head and 7afe bottom end.
    By steveae86 in forum Car Parts For Sale
    Replies: 0
    Last Post: 5th January 2012, 01:36 AM
  2. brand new worked 4age bigport head HKS/Wade/TRD
    By Mr Fujiwara in forum Car Parts For Sale
    Replies: 4
    Last Post: 2nd June 2011, 07:42 PM
  3. Replies: 0
    Last Post: 19th May 2011, 09:40 PM
  4. 4age 16v small port head 4age dizzy for carbies
    By dehney in forum Car Parts For Sale
    Replies: 0
    Last Post: 2nd November 2010, 07:15 PM
  5. 4age 16v head
    By slideways in forum Cars or Parts Wanted
    Replies: 10
    Last Post: 19th August 2009, 11:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •