MX62 are way too long for normal use, and also their balljoint is alot bigger than AE86 so donøt suit the steering arm. Use them only for S13 conversion.

Egg, RA60 struts give about 3 deg positive camber if run on a stock AE86. Sigma arms give around 3 deg neg camber when used on a stock AE86, so going Sigma and RA60 should give roughly zero camber. But if you are doing it I'd be interested to hear what it ends up giving.

Using XT130 arms (also heard rumours RA40 are the same) I used AE86 rack ends, RA40 tie rod tubes and RA40 tie rod ends. So very similar, if not the same parts as Dan above.

Hen