I used to have 3 RT104's. Had injected 18RGEU's in them. As far as I could work out back then, I never found any LSD option with axles to match...... That was 12 years ago though. There might be an option out there.....
Hi Everyone,
I have a 1975 (Series 1) Toyota Corona RT104. It has a T292 diff as per Norbie's Diff/Axel database on Toymods and it also physically has 10 bolts on the housing.
Refer to this link for all cars with the T-series diff:
My question is: Will the Zenki T-Series LSD Centre for the AE86 Sprinter (T282) fit in my Diff (T292).
The RA23, RA28, RA40, TA22, TA23 and the MA45 all have the same T292 diff as my Corona. The only difference is that mine is leaf suspension.
Has anyone put an LSD centre into one of the above vehicles (T292 Diff)?
Also the TE71/TE72 (T-18) has the T312 Diff and from my understanding people put these Diffs in their AE86's and install the Zenki LSD Centre into them.
If I have said anything wrong please correct me lol .
Thanks for your help,
Stephen
I used to have 3 RT104's. Had injected 18RGEU's in them. As far as I could work out back then, I never found any LSD option with axles to match...... That was 12 years ago though. There might be an option out there.....
1974 MX22 MARK II CORONA HARDTOP COUPE - Awaiting a full restoration
Hi,
Did you try to fit any of the centres into the T292? If so which ones did you try? I'm hoping a Zenki LSD centre will fit.
Thanks,
Stephen
Last edited by AE71 InSaNiTy; 10th October 2010 at 11:02 PM.
sorry, never tried
1974 MX22 MARK II CORONA HARDTOP COUPE - Awaiting a full restoration