Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: rotary conversion

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Dec 2008
    Name
    Dan
    State
    Wa
    Location
    Perth
    Country
    Australia
    Posts
    26

    Default rotary conversion

    hav a series 1 box and 12a r5 engine lying around and thinkin of doin naughty things to my 86
    has anyone here done it or hav info
    did rough measurement and should fit
    obviously need to make mounts for engine and box and get shaft fab up but yer any info appreciated

  2. #2
    Veteran driftke70's Avatar
    Join Date
    Dec 2008
    Name
    Ryan
    State
    QLD
    Location
    Buderim
    Country
    Australia
    Posts
    5,496

    Default

    has been done, i was pretty much on track to do a 13bt but couldnt find any clean cuts for anything less than an arm and a leg, but from memory, if you use a 12a front housing, its heaps easier to mount, and if you use a s4 gear box, it should pretty much come out in the right place. A friend of mine recently completed a 12a conversion, I had pics but they are lost in my old pms, but there is one fellow floating around here somewhere, might have not made a new members ride on the new site but he had a pretty clean example.
    wheelfriends.wordpress.com

  3. #3
    Member SSD20V's Avatar
    Join Date
    Dec 2008
    Name
    Telly
    State
    NSW
    Location
    Inner West
    Country
    Australia
    Posts
    74

    Default

    Seen one on youtube in Japan with a 20B Turbo,The thing absolutly ripped.

  4. #4
    Senior Member
    Join Date
    Dec 2008
    Name
    Akio
    State
    Other
    Location
    Mt Haruna
    Country
    Japan
    Posts
    720

    Default


  5. #5
    Junior Member
    Join Date
    Dec 2008
    Name
    Dan
    State
    Wa
    Location
    Perth
    Country
    Australia
    Posts
    26

    Default

    there's always one against rotors xero

  6. #6
    Junior Member
    Join Date
    Dec 2008
    Name
    Dan
    State
    Wa
    Location
    Perth
    Country
    Australia
    Posts
    26

    Default

    driftke70 :
    i am usin a 12a so should be easy enough to mount up.
    is the s4 jus a case of the shifter does not need modifying???

  7. #7
    Senior Member jet111's Avatar
    Join Date
    Jan 2009
    Name
    Mark
    State
    NSW
    Location
    Sydney
    Country
    Australia
    Posts
    181

    Default

    Here is the youtube video of the 20B Sprinter...



    Wait untill 1:49 for the good bit

  8. #8
    Senior Member
    Join Date
    Jan 2009
    Name
    Kevin
    State
    Queensland
    Location
    North Lakes
    Country
    Australia
    Posts
    193

    Default

    i think the 20b is actually a left hand drive model

  9. #9
    Veteran driftke70's Avatar
    Join Date
    Dec 2008
    Name
    Ryan
    State
    QLD
    Location
    Buderim
    Country
    Australia
    Posts
    5,496

    Default

    he used a usdm shell for clearance issues,

    20b is largelly irrelevent to his question

    s4 is same as s5 and 6 in regards to gbox, but the rear housing is different.

    after rebuilding 2 stroke motorbikes you appreciate rotarys.
    wheelfriends.wordpress.com

  10. #10
    Senior Member
    Join Date
    Jan 2009
    Name
    Kevin
    State
    Queensland
    Location
    North Lakes
    Country
    Australia
    Posts
    193

    Default

    yeah sweet i think do it i love the rotary great motor u cant fault a 1.3 lt engine that can make that much power use to own one loved it and regret every day i sold it

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Rotary Powered ke70
    By rotaryrolla in forum KE70 / AE71 Owners Forums
    Replies: 8
    Last Post: 8th March 2010, 03:23 PM
  2. Rotary into T-18?
    By floody31 in forum Technical - Questions
    Replies: 3
    Last Post: 28th May 2008, 09:49 PM
  3. MX-5 Rotary
    By Klutch in forum Toyotas in the Media
    Replies: 3
    Last Post: 11th July 2007, 01:40 AM
  4. Rotary Conversion
    By Lewis in forum Technical - Questions
    Replies: 29
    Last Post: 12th June 2007, 10:38 PM
  5. rotary conversion info needed
    By CHAMP in forum General Topics (No Technical Questions)
    Replies: 2
    Last Post: 10th June 2007, 02:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •