Page 1 of 8 1 2 3 4 5 6 7 8 LastLast
Results 1 to 10 of 71

Thread: 4AGTE KE70. Microtech, W series box lot$$ spent! Needs work. ADL

  1. #1
    Senior Member shuvke70's Avatar
    Join Date
    Dec 2008
    Name
    Jarryd
    State
    SA
    Location
    Para Hills
    Country
    Australia
    Posts
    184

    Default 4AGTE KE70. Microtech, W series box lot$$ spent! Needs work. ADL

    1982 excellent condition body xx ke70
    Next to no rust. has a 2 spots in entire car.

    I am the 3rd owner of this car since new. Purchased from a grandpa. Been ridiculously well looked after. Still have the service history since factory somewhere.

    Quick rundown
    The car originally cost me $1800 stock
    bigport tvis 4agte
    NEW custom steampipe Kelway (ADL made) turbo manifold! just spent $700 on it
    individual coil packs
    brand new head, ported, polished, 3 valve angle grind job (has done less then 50kms on road since installed)
    trust manifold, trust td05 turbo (rebuilt all new seals), trust Front Mount Intercooler
    Custom Cooler Piping
    trust external gate
    custom turbo back straight through 3" with oval muffler at rear (stealth)
    mictrotech lt10 + hand controller
    350mm dish steering wheel (new)
    trust gear knob
    reco'd spooled t series diff
    w58 supra gear box
    puk clutch
    jdm ae86 8kg coilovers + jdm brakes braided lines
    cusco camber tops (new)
    buddyparts 40mm rcas (new)
    6kg 200mm OCS rear springs (new)
    excel G rear shocks (new)
    sound deadening removed interior painted hammertone black/ grey (looks mint)
    full trim minus carpet (can be supplied to buyer)
    vl in/ external fuel pumps, surge set up in boot
    techno 14x8 - 11 and 14x7.5 - 4 may or may not come with car pending how much i get for it
    majority of bushes replaced, super pro and nolathane
    jap strut brace
    t3 panhard rod
    Brand New 53?mm twin core alloy radiator
    JDM te72 quad headlights with gold xxx C badge

    no rego, but have the papers here ready to go!

    if left out heaps but they are the basics

    now the bad.

    currently not running. blows smoke as the bottom end needs a quick hone, rings and bearings and then it'll be mint! have also recently discovered the main reason for smoke is that the oil return line to turbo just needs to be straighted up for better flow.

    suspesion is 90% complete not much left to do at all

    needs a cut and polish

    I have lost interest in the car. If I don't get what I'm asking simple. Wont sell it.

    heres a link to everything thats been done.



    Price: $7,000 neg but no low ballers or time wasters PLEASE!
    I have quiet easily spent well over twice of what I'm asking. I doubt you could build your own 4agte with a w series gear box with a microtech for what I'm asking for the car.

    prefer a cash sale, but MAY possibly take an 'x'E7'x' wagon as part payment.

    Located in the northern suburbs of Adelaide.

    Contact PM or mobile 0434493776

    Do NOT make my thread a place of discussion. Serious enquireys only.

    Thanks

    -Jarryd









    just been rebuilt


    Last edited by shuvke70; 21st February 2011 at 07:12 PM.

  2. #2
    Veteran slide86's Avatar
    Join Date
    Nov 2008
    Name
    Huw
    State
    SA
    Location
    Hills
    Country
    Australia
    Posts
    3,526

    Default

    i know this is a c**t act and i feel bad for it, but IF you part it out, there are some big $ parts im after.

    someone buy it complete tho, it will be a monster of a car

  3. #3
    Senior Member shuvke70's Avatar
    Join Date
    Dec 2008
    Name
    Jarryd
    State
    SA
    Location
    Para Hills
    Country
    Australia
    Posts
    184

    Default

    160kws at the rears on a safe tune of about 15psi from memory.
    if i get enough interest i'll part it out, but rather sell complete.

    buddyparts is the reason this car is just sitting there.

    i just wanna see it go to a good home. someone who has money/ time to get it going

  4. #4
    Junior Member
    Join Date
    Jun 2010
    Name
    Jordan
    State
    SA
    Location
    The port
    Country
    Australia
    Posts
    0

    Default

    Interested in swaps mate?

  5. #5
    Veteran R&D Mechanical's Avatar
    Join Date
    Dec 2008
    Name
    Davey & Riki-lee
    State
    South Australia
    Location
    Seaford SA
    Country
    Australia
    Posts
    3,003

    Default

    aww such a good car! she must be fun as to drive! Hope it goes to a good home! good luck mnan
    R&D Mechanical, Seaford SA - please visit www.rdmechanicalshop.com
    Our introduction - Click here

  6. #6
    Senior Member shuvke70's Avatar
    Join Date
    Dec 2008
    Name
    Jarryd
    State
    SA
    Location
    Para Hills
    Country
    Australia
    Posts
    184

    Default

    depends what your offering mate?

    yea shes an animal on boost.

    rather see her go to a good home guys. all reasonable offers considered

  7. #7
    Senior Member 4agte70's Avatar
    Join Date
    Feb 2010
    Name
    Wayne
    State
    SA
    Location
    Happy Valley
    Country
    Australia
    Posts
    123

    Default

    You've come this far dude and your loosing big time to sell it for that. My brand new stainless HKS manifold cracked in about a million places on my old s13. Stainless sucks ass
    20V silvertop, HKS 2510, Microtech LT10s with dash display, A Spec coilovers, AJPS RCAs + traction brackets, T3 adj trailing arms, TRD 2 way, braided brake lines,Kelway half cage, Cusco cambertops and braces. 174rwkw @ 15psi....SOLD

    CA18det Gayzelle cooner

  8. #8
    Veteran AJPS's Avatar
    Join Date
    Nov 2008
    Name
    David
    State
    SA
    Location
    Lonsdale
    Country
    Australia
    Posts
    4,245

    Default

    sucks to hear man!

    I think you should keep it, seriously!

  9. #9
    Senior Member shuvke70's Avatar
    Join Date
    Dec 2008
    Name
    Jarryd
    State
    SA
    Location
    Para Hills
    Country
    Australia
    Posts
    184

    Default

    lost interest
    kelway manifolds 400 - 450$
    reco bottom ends $500 give or take
    n shes drift ready.
    like i said. dont get what im asking ill keep it
    have my ae93 to play with so its not like im giving up corollas

    bump

  10. #10
    Junior Member Karllos's Avatar
    Join Date
    Dec 2008
    Name
    Karllos
    State
    SA
    Location
    Adelaide
    Country
    Australia
    Posts
    10

    Default

    +REP for the Kelway manifolds.

    Excuse the spam, Reminds me of my old keto.. hope it gets finished by who ever owns it!
    2001 Toyota Corolla Sportivo Levin Turbo 40/110
    Kelway Manifold
    Equipped With A New GT2560R Turbo
    Xtreme Heavy Duty Clutch
    ISC/Bazda Coilovers

Page 1 of 8 1 2 3 4 5 6 7 8 LastLast

Similar Threads

  1. 4age rwd, box, loom, need the lot. Tas
    By sprinterturbs in forum Cars or Parts Wanted
    Replies: 1
    Last Post: 13th September 2011, 01:29 PM
  2. 4agte part out. Microtech, w55, exedy,
    By Nic19 in forum Car Parts For Sale
    Replies: 11
    Last Post: 30th March 2010, 10:03 PM
  3. microtech and ae86 taco how do you get to work
    By ae86-13b in forum Technical - Questions
    Replies: 1
    Last Post: 27th July 2009, 07:01 PM
  4. CA18DET,fresh s15BB turbo, box, fuel set up ADL. 2K ADL!!!
    By Rotor-Warrior in forum Car Parts For Sale
    Replies: 5
    Last Post: 27th March 2009, 06:10 PM
  5. mr2, 4agze, microtech, paint, plenty spent.
    By spanielmr2 in forum Cars for Sale (Toyota Only)
    Replies: 0
    Last Post: 7th January 2009, 10:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •