Page 1 of 24 1 2 3 4 5 6 7 8 9 10 11 ... LastLast
Results 1 to 10 of 239

Thread: Bluterus's KE70

  1. #1
    Senior Member Bluterus's Avatar
    Join Date
    Jan 2009
    Name
    Peter
    State
    VIC
    Location
    Pakenham
    Country
    Australia
    Posts
    490

    Default Bluterus's KE70

    Hey everyone my names Pete. I just recently bought an 1983 KE70 for $200 and its got a little rust but not bad for $200
    Its just your plain crappy old 4K with 5 speed. Everything is stock. Its got 153xxx km's on it.




    Here are my plans.
    Get it registered first
    4AGE'd
    Wheels
    Lowered
    2way lsd
    tint
    respray white with xx trim
    cut out rust
    Pretty good sound system nothing over the top

    After all that I'll probably look at the brakes. Its going to be my daily/project I also have a BF XR8 ute which I use as a parts runner and will use when this is off the road.

    So far I have acquired a 4AGE bigport from an AE82 its an older black and blue top with only weaker 3 rib block but it will be way better than the 4k.



    I'm awaiting some parts to be shipped to me from a few guys on here then I'll still need to find some other things like a T50 and T18 rear end. Once I have everything I'll start my build.

    I've acquired two tacho dashes so I'll test them both this week and if they both work one will be up for sale.
    Last edited by Bluterus; 10th February 2009 at 05:02 PM.
    My Project Thread! KE70 4AGTE Build & Respray
    http://www.ae86drivingclub.com.au/fo...ead.php?t=2294

  2. #2
    Senior Member
    Join Date
    Dec 2008
    Name
    A
    State
    NSW
    Location
    Parky
    Country
    Australia
    Posts
    332

    Default

    Nice car,
    i now own your jet ski lol,

  3. #3
    Senior Member Bluterus's Avatar
    Join Date
    Jan 2009
    Name
    Peter
    State
    VIC
    Location
    Pakenham
    Country
    Australia
    Posts
    490

    Default

    Are you Julian?
    My Project Thread! KE70 4AGTE Build & Respray
    http://www.ae86drivingclub.com.au/fo...ead.php?t=2294

  4. #4
    Senior Member Bluterus's Avatar
    Join Date
    Jan 2009
    Name
    Peter
    State
    VIC
    Location
    Pakenham
    Country
    Australia
    Posts
    490

    Default

    if you are Julian I thought you said to me don't buy a KE70?

    Hows the ski going?
    My Project Thread! KE70 4AGTE Build & Respray
    http://www.ae86drivingclub.com.au/fo...ead.php?t=2294

  5. #5
    Senior Member
    Join Date
    Dec 2008
    Name
    A
    State
    NSW
    Location
    Parky
    Country
    Australia
    Posts
    332

    Default

    yeh dont buy a ke70,
    get an ae71, so much easier.
    WELL,
    had some issues with ski,
    battery was stuffed,
    fuel tap not hooked up and needed a tune badly.
    but sorted 2 of the 3 out,
    so hopefully this weekend will be its first proper voyage,
    had 2 failed attempts of it not starting lol

  6. #6
    Senior Member Bluterus's Avatar
    Join Date
    Jan 2009
    Name
    Peter
    State
    VIC
    Location
    Pakenham
    Country
    Australia
    Posts
    490

    Default

    true true AE71 is easier but much more expensive.
    It was flat cause it had been sitting a while didn't know it was stuffed though it charged and seemed to hold ok.
    You shoulda let me know I got two spares here off newer skis just have to change the terminals on the wires.
    As for the fuel tap I knew it wasn't hooked up but never caused a problem before it was just bypassed forgot to tell you though.
    As for the tune I'm sure I told you it would need one as twin carbies are a bitch to tune.
    Why wouldn't it start? Did you end up checking out the crank? I remember you said you might take a look at it but as I said when I rebuilt it it was fine and I replaced all the seals and bearings.
    My Project Thread! KE70 4AGTE Build & Respray
    http://www.ae86drivingclub.com.au/fo...ead.php?t=2294

  7. #7
    Senior Member
    Join Date
    Dec 2008
    Name
    A
    State
    NSW
    Location
    Parky
    Country
    Australia
    Posts
    332

    Default

    im going to wait for it to blow up before i bother lol,
    buying a new battery tomorrow, 550cca!!!
    yeh it held charge the first time need just wouldnt again.
    Fuel tap being open all the time just flooded it constantly,
    and the primer is massssssive but seems to be all sorted.
    What batteries are they you have?

  8. #8
    Senior Member shuvke70's Avatar
    Join Date
    Dec 2008
    Name
    Jarryd
    State
    SA
    Location
    Para Hills
    Country
    Australia
    Posts
    184

    Default

    pretty mint for $200!

    looks rather straight n the interior is fresh 2

    g/l finding the pedal box lol! that was the biggest c*#t for me 2 find and fit

    should have your bits sent off to you on friday

    -Jarryd

  9. #9
    Senior Member Bluterus's Avatar
    Join Date
    Jan 2009
    Name
    Peter
    State
    VIC
    Location
    Pakenham
    Country
    Australia
    Posts
    490

    Default

    Yeah it is very straight only has two small dings in the drivers door and one in the bonnet.

    Interior is great too not a mark on it. It does have quite a bit of rust in the left corner of the boot but I'll just cut it out for $200 I feel there's very little rust at all.
    I finished a datsun 620 ute about 3 months ago and that had heaps so this should be easy.

    As for the pedal box thanks to 20V_Kid I've got one being shipped to me right now with clutch master and line.

    Just need extractors, T50, T18 Diff, Clutch slave(Hopefully will come with gearbox), Remote thermostat housing, Fuel pump, fuel regulator, Rubber engine mounts.

    Tossing up between cut n shut my manifold or just forking out and going a genuine RWD one.
    Last edited by Bluterus; 12th February 2009 at 09:20 AM.
    My Project Thread! KE70 4AGTE Build & Respray
    http://www.ae86drivingclub.com.au/fo...ead.php?t=2294

  10. #10
    Senior Member Bluterus's Avatar
    Join Date
    Jan 2009
    Name
    Peter
    State
    VIC
    Location
    Pakenham
    Country
    Australia
    Posts
    490

    Default

    I dunno I'd have to check but they're about half the size of the one in there but with more amp/h.
    It shouldn't blow up for a while I replaced everthing except one piston which was ok.
    But I did new gaskets, bearings, seals, rings, one piston, machined the head, stator, stator wiring, starter motor, few new studs.
    My Project Thread! KE70 4AGTE Build & Respray
    http://www.ae86drivingclub.com.au/fo...ead.php?t=2294

Page 1 of 24 1 2 3 4 5 6 7 8 9 10 11 ... LastLast

Similar Threads

  1. Bluterus' Bluterus (XR8 Ute)
    By Bluterus in forum Other Rides
    Replies: 28
    Last Post: 17th August 2010, 12:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •