185/60 will be nice imo... but if u want a big pull 175/165 lol
i have a set of mesh wheels im building and they are 14 by 8 i want to know the most stretched tires i can get on these wheels im looking at federals but just the size im looking for cheers everyone
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
185/60 will be nice imo... but if u want a big pull 175/165 lol
yes i want insane so maby the 175 but will the 60 be enough profile for the rolling diameter to be correct
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
i got 185 on my 13x7s works well.. rubbs only a little on rolled gaurds with adj pan hard rod.. if u decide to go 185s let me know how much they rub if they do at all. cause i got 13x8 laying round i wouldnt mind trying
olympic gold keto
iv got some 13by8 on my rear on my super lights check my build thread you can see the stretch on the rear but these wheels im building i wan a fair amount does any1 have pics of some 14by8 with some mad stretch
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
Urgggh. Not really going to get alot of stretch on an 8. Just go a 185 60.
What do you want stretch for? 185/60 will give the best tyre choice. No point stretching on a 175 or smaller or otherwise you pretty much at factory tyre widths again.
well then 185 sounds alright ill give it a go im looking for a set of good looking bozo wheels so these should look killer lol
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
If your looking at Federals still pretty much all your going to get is a 185/55 in a 14. Wont really be any stretch.
You have a 4age. Def's 185.
It's bosozoku. 'bozo' as people like to shorten it and misspell it, by it's self is a different meaning.