QFM High Performance Street and Track Brake Pads!

[ke25 race]

Price and availabilty for the Race pads

RX7 series 4 alloy 4 spot pads

and
JDM Sprinter T series Disc Brake rear pads

For a sports sedan race car

How does these compare to the FERODO 2500 pads?

[gslrallysport]

Depending on what Hilux caliper is it we've probably got the pads on the shelf. We've got quite a few of those 4 pot conversion pads on the shelf in both compounds.

If we haven't got it on the shelf, we can still order it, same price, just need to allow time for manufacture, usually 6-8 weeks.

Regards,
Greg

[gslrallysport]

Hi mate,

Got both QFM A1RM (Street/Track) and QFM Comp 9 (Track Only) on the shelf for the S4 4 pot. A1RM $119, and Comp 9 $149.

Got HPX on the shelf, $79. I wouldn't personally got any higher in the rear as the HPX is still good for 550 degrees, but has a perfectly stable friction level cold to hot, which makes it ideal for the rear. Can get the A1RM, $119, allow 6-8 weeks for manufacture.

News just in with regards to the A1RM:
"So far will definately use again, good bang for buck for a dual purpose pad. At the moment they are looking like a viable alternative to DS2500's and the like but at a non theiving price."


The Comp 9 is a big step up again, and more like a DS3000. If it's a track only race, I'd definitely be temped to step up the QFM Comp 9.

Any other questions just let me know.

Regards,
Greg

[gslrallysport]

More news just in!!!

[gslrallysport]

The other pads fit fine though? Cause the JDM set has pretty different other pads...

Could very well be. I don't know about Toyota, but I know with the euro stuff alot of caliper and caliper carrier swapping goes on...

That's unusual to hear... The A1RM has a cold friction of 0.40, which is miles above something like a Bendix Ultimate or EBC Green which are both around the 0.36 mark. Even QFM normal street pads are 0.41 when hot. Good feedback none the less, if you have any dramas let me know.

Regards,
Greg

[gslrallysport]

A1RM fitted to WRX!

[gslrallysport]

*** JDM A1RM Pads now back in stock!!! ***

Apologies for those that have been waiting, but we sold out quicker than we could order them.

We've now got good stock of the A1RM to suit JDM caliper. To celebrate we're doing a front JDM A1RM and rear HPX pad combo, usually $198 plus shipping, we're doing this package deal for $185 including shipping!!! Will end at the end of May. Or else A1RM fronts are their own are $119.

Any questions or dramas just let me know!

Regards,
Greg

[gslrallysport]

QFM A1RM Fitted to S14 Silvia

[Intense]

Can you get the A1RM for front mx62 callipers?

[gslrallysport]

Hi mate,

Certainly can. Unfortunately though it's a made on order pad (like most QFM's), so it'll be 5-6 weeks away. I've thrown a few on order so we'll always have some on the shelf in the future. Regular pricing of $119 per axle set.

Regards,
Greg