Page 1 of 15 1 2 3 4 5 6 7 8 9 10 11 ... LastLast
Results 1 to 10 of 141

Thread: QFM High Performance Street and Track Brake Pads!

  1. #1
    Senior Member gslrallysport's Avatar
    Join Date
    Jan 2009
    Name
    Greg
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    415

    Default QFM High Performance Street and Track Brake Pads!



    GSL RallySport stocks the complete range of QFM Performance Brake Pads!

    Queensland Friction Materials is a QLD based disc brake pads manufacturing business which was established in 1989.

    The emphasis at QFM as been to develop high quality disc brake pads at highly competitive prices, and this follows through to their excellent performance range!

    QFM's Performance Street pads fall into two compounds. The first is the HPX pad which is the perfect choice for street cars looking for excellent braking performance whilst retaining all the qualities of a good street pad. The HPX pads are ideal for high performance street cars looking for higher working temperatures with reduced fade, and also for Four Wheel Drives or vehicles looking to enhance their towing capacity or safety.The HPX pads unlike many pads in this performance range are virtually dust free, whilst maintaining low rotor wear.

    QFM's second high performance street pad is the A1RM compound and provides QFM with its club sport track pad. It is ideal for high performance street cars that take to the track to test the limits, whilst still being a streetable pad. The A1RM is ideal for club level rally and hill climb where brakes are required right from the first corner!

    SPECIFICATIONS
    Formulation - Cold Friction - High Friction - Temperature (C)

    HP-X - 0.41 - 0.42 - 0-550
    A1RM - 0.40 - 0.48 - 0-780

    QFM has an extensive range covering most makes or models, and can also re-line existing backing plates or old pads! If you have a 'hard-to-get-decent-material' pad, let QFM Performance put one of their high performing compounds onto your pads!

    Any questions or to order, give us a bell on 1300 884 836.

    Website with full list of customer feedback and links!


    Last edited by gslrallysport; 11th February 2009 at 07:00 PM.

  2. #2
    Senior Member gslrallysport's Avatar
    Join Date
    Jan 2009
    Name
    Greg
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    415

    Default

    Some of the latest feedback on QFM pads:

    A1RM




    HPX




    For more info and reports (with links!) checkout

    Cheers,
    Greg

  3. #3
    Senior Member gslrallysport's Avatar
    Join Date
    Jan 2009
    Name
    Greg
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    415

    Default

    *** Half Price Rears Deal on AE86 Rear Pads! ***

    To celebrate GSL RallySport as a sponsor on AE86 we're offering rear pads at half price when purchased with fronts! Standard pricing is $79 per set front or rear in HPX, or $119 per set front or rear in A1RM. That means you can get front and rear HPX for $131 delivered, front and rear A1RM for $191 delivered, or front A1RM and rear HPX for $171 delivered!

    We've currently got heaps of stock on the shelf available straight away for the AE86:

    - JDM HPX Front Pads
    - JDM A1RM Front Pads
    - ADM HPX Front Pads
    - ADM A1RM Front Pads
    - ADM A1RM Front Pads minus 3mm thickness (for use with JDM ventilated rotor)
    - HPX Rear Pads
    - A1RM Rear Pads

    Quick run down on the pads:
    - The HPX is a Bendix Ultimate type performance pad, good for about 550 degrees, whilst being virtually dust free, and low rotor wear.
    - The A1RM is a Ferodo DS2500 type performance pad, good for about 780 degrees, but will still work from dead cold (A1RM and HPX have the same cold friction), and relatively low dust and rotor wear. I run the A1RM in both my daily road car and rally car and it isn't a compromise in either.

    Any other questions feel free to let us know, or give us a bell on 1300 884 836.
    Last edited by gslrallysport; 11th February 2009 at 12:36 PM.

  4. #4
    Senior Member
    Join Date
    Dec 2008
    Posts
    524

    Default

    i jdm t series rear pads A1RM and any possibilty of the same in the front for s13 sr brakes? please pm price
    Last edited by rich_86; 11th February 2009 at 06:38 PM.

  5. #5
    Senior Member gslrallysport's Avatar
    Join Date
    Jan 2009
    Name
    Greg
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    415

    Default

    Hi Rich,

    Which S13 SR front calipers have you got?
    SR20DET:

    or SR20DE:


    PM Sent also.

    Regards,
    Greg
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  6. #6
    Senior Member gslrallysport's Avatar
    Join Date
    Jan 2009
    Name
    Greg
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    415

    Default



    For those that have Facebook, become a fan of QFM Performance Pads, and post your feedback and experiences!

    Click the above logo, or
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  7. #7
    Veteran Andy San's Avatar
    Join Date
    Jan 2009
    Name
    Andy
    State
    SA
    Location
    Adelaide Hills
    Country
    Australia
    Posts
    1,111

    Default

    i would like a set of front and rear in the A1RM please, can you please pm me with some payment info if you could, or do i have to ring the number to order?

    JDM AE86 (vented) front and (disc) Rear by the way

    Thanks
    Andy

    Quote Originally Posted by slide86 View Post
    I will however take take the water from the washer bottle posted to a boat in the southern pacific....express please

  8. #8
    Senior Member gslrallysport's Avatar
    Join Date
    Jan 2009
    Name
    Greg
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    415

    Default

    Hi Andy,

    Easiest way to order is to swing me your details (either by PM, or preferably email sales <at> gslrallysport dot com), full name, delivery address (preferably work or business), contact number and email and I can fire you through an invoice with direct deposit details. Alternatively credit card over the phone is available on the 1300 number, business hours only though, I'm not there now!

    Cheers,
    Greg
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  9. #9
    Senior Member gslrallysport's Avatar
    Join Date
    Jan 2009
    Name
    Greg
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    415

    Default

    Latest feedback:
    HPX on an E30 BMW
    Last edited by gslrallysport; 16th February 2009 at 11:39 AM.
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  10. #10
    Senior Member
    Join Date
    Feb 2009
    Name
    Steve
    State
    NSW
    Location
    Other
    Country
    Australia
    Posts
    391

    Default

    I hope this doesnt sound too rude but has anyone tried the HPX pads on an aus-spec hachi with slotted rotor's.

    Im after info like how do they fit in the caliper, nice and tight or loose and sloppy, do they fit without mods ie cutting-shaving the edges down to fit. Do they clunk everytime you apply or release the brake.

    The reason i ask is im sick to death of people thinking they are brake experts and just flog off absolute crap.

Page 1 of 15 1 2 3 4 5 6 7 8 9 10 11 ... LastLast

Similar Threads

  1. SA: QFM A1RM Brake Pads
    By Fusion in forum Car Parts For Sale
    Replies: 2
    Last Post: 20th March 2010, 07:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •