AE71 auto to manual conversion

[antman89]

AE71 Auto to manual conversion

problem - using auto bolts to attach manual gearbox to engine or where i can get new bolts,

- also how to bypass neutral safety for the auto or what do other people do?

[ke_70]

you should be able to use the same bellhousing bolts for the gearbox's

near the shifter is 4 wires. 2 are for the lights in the auto shifter. the other 2 are the "start only in park" wires. join these together to bypass. (might be black from memory?)

[Sam-Q]

M12 x 1.25pitch, any bolt store but they will have an 18mm head instead of 17mm.

[lolwat]

why cant you use auto bolts they too long too short or what???
ust remove the switch and bridge the 2 wires together

[antman89]

thanks i thought you could use the same bolts half way through conversion just covering my self, wires are a easy fix lol

[lolwat]

fair enough hope all goes well

[antman89]

ok car wont start auto has 4 wires coming off the actual box, (only 2 wires near shifter for the light) one red single wire and 3 in a loom just wondering how what i should do need car to run thanks

[lolwat]

get the ones near the shifter should be them

[lolwat]

if you can take a pic that would be awesome

[antman89]

the shifter ones go straight to a globe for gear lights? crap photo but they are the 2 plugs off the trans