Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Beams 3SGE with Blitz Supercharger kit.

  1. #1
    Senior Member
    Join Date
    Dec 2008
    Name
    Scott
    State
    QLD
    Location
    Gympie
    Country
    Australia
    Posts
    197

    Default Beams 3SGE with Blitz Supercharger kit. sold

    3SGE with blitz supercharger and inter-cooler, motor was running, had about 20000k on it according to the speedo out of the half cut, i used it for about 1800, dyno sheet attached. motor was running the supplied fuel controller which just dumped fuel in.

    Includes gear box, a manual for the supercharger.. or well as good as I could find. Blitz boost gauge. ECU, the ECU that came with the Half cut use to flash the TRC light but the engine use to run fine.

    The only real problem i had with this was with the AC It worked but would pop an error and it would drop out. my reasoning for this is that my body loom was different to the one that the car it came out of. I took it to the AC guy around here and he couldn't find any thing wrong with it. so yeah, just one of those things i guess. some of the Inter-cooler pipes have some dents and what not because the half cut was quiet damaged when i got it. its a bit of a mix and match. but it all works, if any thing i'd look at getting a smaller inter-cooler.

    I'm looking for $3500 Its located on the Gympie I'd love to keep it but I cant justify it any more. - sold




    Video of the engine running.



    *note on Dyno figures, the standard fuel controller that comes with this just dumps fuel in, with a proper fuel controller I'm sure you could get much better performance figures. Don't get me wrong but! it use to go great! Huge improvement on what it was.

    PM me here to get in contact.

    Also the motor is no longer in the car.

    Can also include a body loom if needed.
    Last edited by Poobrown86; 2nd January 2012 at 12:41 PM.

  2. #2
    Senior Member
    Join Date
    Dec 2008
    Name
    Scott
    State
    QLD
    Location
    Gympie
    Country
    Australia
    Posts
    197

    Default

    Bump.

  3. #3
    Senior Member
    Join Date
    Dec 2008
    Name
    Scott
    State
    QLD
    Location
    Gympie
    Country
    Australia
    Posts
    197

    Default

    Bump.

  4. #4
    Senior Member
    Join Date
    Dec 2008
    Name
    Scott
    State
    QLD
    Location
    Gympie
    Country
    Australia
    Posts
    197

    Default

    Bump, this would be sick in an 86 or 70!

  5. #5
    Senior Member
    Join Date
    Dec 2008
    Name
    Scott
    State
    QLD
    Location
    Gympie
    Country
    Australia
    Posts
    197

    Default

    Bump.

  6. #6
    Senior Member
    Join Date
    Dec 2008
    Name
    Scott
    State
    QLD
    Location
    Gympie
    Country
    Australia
    Posts
    197

    Default

    Bump.

  7. #7
    Senior Member
    Join Date
    Dec 2008
    Name
    Scott
    State
    QLD
    Location
    Gympie
    Country
    Australia
    Posts
    197

    Default

    Bump.

  8. #8
    Senior Member
    Join Date
    Dec 2008
    Name
    Scott
    State
    QLD
    Location
    Gympie
    Country
    Australia
    Posts
    197

    Default

    3500 any one want it?

  9. #9
    Senior Member
    Join Date
    Dec 2008
    Name
    Scott
    State
    QLD
    Location
    Gympie
    Country
    Australia
    Posts
    197

    Default

    Bump

  10. #10
    Senior Member
    Join Date
    Dec 2008
    Name
    Scott
    State
    QLD
    Location
    Gympie
    Country
    Australia
    Posts
    197

    Default

    3SGE with blitz supercharger and inter-cooler, motor was running, had about 20000k on it according to the speedo out of the half cut, i used it for about 1800, dyno sheet attached. motor was running the supplied fuel controller which just dumped fuel in.

    Includes gear box, a manual for the supercharger.. or well as good as I could find. Blitz boost gauge. ECU, the ECU that came with the Half cut use to flash the TRC light but the engine use to run fine.

    The only real problem i had with this was with the AC It worked but would pop an error and it would drop out. my reasoning for this is that my body loom was different to the one that the car it came out of. I took it to the AC guy around here and he couldn't find any thing wrong with it. so yeah, just one of those things i guess. some of the Inter-cooler pipes have some dents and what not because the half cut was quiet damaged when i got it. its a bit of a mix and match. but it all works, if any thing i'd look at getting a smaller inter-cooler.

    I'm looking for $3500 Its located on the Gympie I'd love to keep it but I cant justify it any more.




    Video of the engine running.



    *note on Dyno figures, the standard fuel controller that comes with this just dumps fuel in, with a proper fuel controller I'm sure you could get much better performance figures. Don't get me wrong but! it use to go great! Huge improvement on what it was.

    PM me here to get in contact.

    Also the motor is no longer in the car.

    Can also include a body loom if needed.
    Last edited by Poobrown86; 5th August 2011 at 09:06 AM.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. 3SGE Beams
    By Jacobxxx in forum Ebay Items - My Stuff
    Replies: 1
    Last Post: 29th October 2012, 12:03 PM
  2. Where to find 3SGE BEAMS Oil Cooler & Oil Filter Relocation Kit
    By 4A-G3 in forum Technical - Questions
    Replies: 10
    Last Post: 3rd February 2011, 12:12 AM
  3. Replies: 12
    Last Post: 29th November 2010, 09:00 AM
  4. beams 3sge conversion?
    By Tbo92 in forum Technical - Questions
    Replies: 46
    Last Post: 19th February 2010, 01:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •