Results 1 to 5 of 5

Thread: Sandwich plate/engine end plate info needed 4AGE

  1. #1
    Member
    Join Date
    Mar 2010
    Name
    Jason
    State
    QLD
    Location
    West Brisbane
    Country
    Australia
    Posts
    34

    Default Sandwich plate/engine end plate info needed 4AGE

    I recognize there is a differance between a JDM 22 spline T50 and a 20 spline AE71 T50. I also realize there is a difference with the bellhousing being that the clutch fork is located on the drivers side in the JDM bellhousing. The engine end plate part No. is differrant between the AE86 and AE71 according to

    Questions

    1. is the ONLY difference between bellhousings the clutch fork location?

    2. will an engine endplate from an 4A AE71 work with the JDM T50 bellhousing.

    So close to putting the motor in the car, just stuck with this last peice of the puzzle. Asked heaps of people for a 86 end plate but know luck.

  2. #2
    Moderator Sam-Q's Avatar
    Join Date
    Dec 2008
    Name
    Sam
    State
    VIC
    Location
    Endeavour Hills
    Country
    Australia
    Posts
    4,242

    Default

    I am scratching my head over this one, all ae86 and ae71 are meant to be the same
    My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts

    - SQ Engineering on facebook -

    Please e-mail to contact me instead of sending a private message on here.

  3. #3
    Veteran Skylar's Avatar
    Join Date
    Mar 2009
    Name
    Ken
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    1,370

    Default

    0: gearbox on ae86 and ae71 are same aside from shifter aside from the 87 T-50

    1: yeah, probably. Pointing out the obvious but the clutch slave will follow the clutch fork to the other side too.

    2: yes. I've put aus T-50 onto jdm end-plate. Don't see why it wouldn't work the other way.

  4. #4
    Member
    Join Date
    Mar 2010
    Name
    Jason
    State
    QLD
    Location
    West Brisbane
    Country
    Australia
    Posts
    34

    Default

    Thank you. Hate having to ask dumbarse questions but its the only way Im gonna learn.
    cheers Jason

  5. #5
    Veteran Skylar's Avatar
    Join Date
    Mar 2009
    Name
    Ken
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    1,370

    Default

    Yeah, like sam said, I doubt any of us even knew the plate was different. The way I saw it was, it's a 4a block, the thing that attaches behind it must be the same because all 4a have the same gearbox attachment points, and never questioned it.

Similar Threads

  1. 4AGE Sandwich Plate (between gbox and engine)
    By seabiscuit in forum Cars or Parts Wanted
    Replies: 2
    Last Post: 20th September 2012, 10:27 AM
  2. Replies: 5
    Last Post: 4th May 2012, 11:48 PM
  3. Engine end plate and stiffeners JDM T50/4AGE
    By killar_of_giants in forum Cars or Parts Wanted
    Replies: 6
    Last Post: 6th February 2011, 10:51 PM
  4. 4age oil cooler sandwich plate
    By HiLtOn in forum Car Parts For Sale
    Replies: 7
    Last Post: 3rd October 2007, 09:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •