Page 1 of 11 1 2 3 4 5 6 7 8 9 10 ... LastLast
Results 1 to 10 of 110

Thread: Beams KE10 Build

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Jordain's Avatar
    Join Date
    Jul 2010
    Name
    Jordain
    State
    NSW
    Location
    Penrith
    Country
    Australia
    Posts
    109

    Default Beams KE10 Build

    Well this is where it all starts for me, first car build and first car. Its a 1969 ke10 Corolla. I bought it off eBay and here is what I bought.. thinking it was complete.



    Actual image from the eBay advertisement



    The night I got my car home, At this stage I started to realise things were missing haha!





    I started pulling things off, before I knew it the car was a shell




    and what would a Corolla be without rust.. We love rust. Not.







    Main reason I wanted to pull and lip the guards abit...


    Flare look dodgy here, but they got completely welded on and ground back.
    It gets better, I spent 2 months on the body preparations making sure I got it as good as I could. I'm not a Panel beater or spray painter either.

















    Domo say's Hi

    The last 2 months have deffiantly paid off, the car is awsome. I'm currently assembling it, finding all the little trims and getting replacements for most parts is prooving to be a pain although I will get it done. I picked the car up from my mates spray booth 2 days ago. I have all the chrome strips on, most of the glass in and most rubbers all cleaned and ready to be put on. The car should be done soon I hope.










    New Rubbers Just about all through the car. I replaced every perished rubber I could get my hands on... cost abit but worth every cent!





    Stickers are appearing in numerous places hahaha. I will get a JNC one and put one somewhere

    Update soon!

  2. #2
    Senior Member Jordain's Avatar
    Join Date
    Jul 2010
    Name
    Jordain
    State
    NSW
    Location
    Penrith
    Country
    Australia
    Posts
    109

    Default







    Well I got the car running with the 4k motor, till I decided It wasn't fast enough within a few seconds of driving it.



    So out goes the 4k and in goes a new motor.



    2TG Pow-ah

    Also started building another KE10B... Its dead original.





    Paints pealed in a few spots around the car and one tiny rust bubble has appeared on the drivers door, but I've since tig welded it up and its getting finished this weekend.. hopefully have it in the spraybooth for a full respray within the next 2-3 weeks.

    This ones getting a 5k/4spd motor... purely for weekends.

    If anybody is interested, I actually have another KE10.. 4k/toyoglide in decent condition, although has some more rust. PM me if you are serious about it.

  3. #3
    Veteran blake.'s Avatar
    Join Date
    Jun 2009
    Name
    Blake
    State
    NSW
    Location
    Penrith
    Country
    Australia
    Posts
    1,171

    Default

    dude this is nice, i think i was talking to you earlier bout the ke70. jordian is it?
    Quote Originally Posted by Gunner View Post
    Id explain more but there people on here I dont like, and i want to see this shit on thsir supposedly awesome masterfully built but stock power making 20v
    bursting ovaries since 92'

  4. #4
    Senior Member
    Join Date
    Dec 2008
    Name
    Calvin
    State
    VIC
    Location
    Kilsyth
    Country
    Australia
    Posts
    655

    Default

    awesome work. 2tg is going to be a tight fit. good luck with it. will be a very quick car
    T18 in the build

  5. #5
    Veteran R&D Mechanical's Avatar
    Join Date
    Dec 2008
    Name
    Davey & Riki-lee
    State
    South Australia
    Location
    Seaford SA
    Country
    Australia
    Posts
    3,003

    Default

    stunning, love the old ones!
    R&D Mechanical, Seaford SA - please visit www.rdmechanicalshop.com
    Our introduction - Click here

  6. #6
    Senior Member Blaike's Avatar
    Join Date
    Nov 2010
    Name
    Blaike
    State
    NSW
    Location
    Penrith
    Country
    Australia
    Posts
    200

    Default

    good stuff jordain

  7. #7
    Senior Member Jordain's Avatar
    Join Date
    Jul 2010
    Name
    Jordain
    State
    NSW
    Location
    Penrith
    Country
    Australia
    Posts
    109

    Default

    Yeah, Jordains the name

    Yeah, 2tg.. doesn't exactly fit in the old KE10's.

    I've got a custom cut down KE70 cross member with the rack and pinion for it to go in soon when i sort out some stuff, R31 LSD diff.. Tilton floor mounted pedal box all inside the car so I can get those porno DCOE 40 webers or FCR quad bike carbys in there nicely.

    The 2tg has been bored a little and has a 2t crank, although i'm putting a 3t crank into it so it's just shy of 2l.. 1940cc to be precise, set of reground cams and equal length stainless extractors. Ah, plenty of welding to do haha!

    This cars currently on hold for a little bit, I am going to finish the original KE10 first, just because I want a car and the 2tgke will take a while to sort out.

  8. #8
    Senior Member
    Join Date
    Dec 2008
    Name
    Calvin
    State
    VIC
    Location
    Kilsyth
    Country
    Australia
    Posts
    655

    Default

    it'll go out to a 1940 if you use 89mm forged pistons. i was going to build one of these ages ago and was going to run 3t crank and 86mm acl cast pistons which helped keep costs down and end up with a capacity just over 1.8l.
    T18 in the build

  9. #9
    Senior Member Jordain's Avatar
    Join Date
    Jul 2010
    Name
    Jordain
    State
    NSW
    Location
    Penrith
    Country
    Australia
    Posts
    109

    Default

    Yeah 89mm forgies, I'm still undecided though. I think the 1600 will rev harder, but I may be wrong and my friend Fonzy did the 1940cc motor and thinks its shits all over the 1600

  10. #10
    Senior Member Jordain's Avatar
    Join Date
    Jul 2010
    Name
    Jordain
    State
    NSW
    Location
    Penrith
    Country
    Australia
    Posts
    109

    Default







    Yes I know its off centre. KE70 rails seem to bend inwards.. No idea why but it fits in the KE10 Like this! Yes I measured about 5 times because I could not believe it haha!





    Birdpoo weld



    2TG KE10 Cross member with a rack and pinion.. Woo! - Excuse the blind looser... hahahah!



    The result, Two happy Corollas!

    OH forgot to mention... New steering wheel for JDM KE10


    Got into it again today...












Page 1 of 11 1 2 3 4 5 6 7 8 9 10 ... LastLast

Similar Threads

  1. JDM BEAMS Notchback track build
    By ke_70 in forum AE86 Owners Forums
    Replies: 630
    Last Post: 19th May 2014, 11:55 AM
  2. Outlaw Ke10 Build.
    By Jono.C in forum Other Toyotas
    Replies: 1
    Last Post: 2nd March 2012, 06:41 PM
  3. Replies: 12
    Last Post: 29th November 2010, 09:00 AM
  4. Ke10 build
    By Jordain in forum Other Toyotas
    Replies: 9
    Last Post: 9th August 2010, 07:46 PM
  5. WTB ke10
    By zookieboi in forum Cars or Parts Wanted
    Replies: 5
    Last Post: 4th July 2009, 08:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •