i would also like to find this
might have a dig on google
Does anyone have the link to the page which explained how to modify your circuit board in the tacho so it works with a microtech/haltech tacho signal wire?
I used to have the page saved, but it seems to have gone missing.
had all the step by step pictures and the explanation of all the parts required.
Cheers
i would also like to find this
might have a dig on google
2 mins and found
link to ae86dc tech article
hi guys ,
on my tacho everything works as normal without this mod. and i am running a mirco tech ...
will doing this mod give me a more accruate readout of speed and revs?
Hey mate
You must be running a distributor with a single coil setup, Yes?
This is more aimed at cars running direct fire setups, ie 4x coils instead of 1.
sorry for being brief.. my car is running a 4agze, that has been turbo'ed . using the
4agze DLI and cas.
im using a mirco tech lt10s. im interested in this mod if it will give me a more accruate reading as im running a w58 gearbox + 4.1 final ratio and 195/50/r15s . im pretty sure my tacho is out of wack .
Last edited by redsprinter; 26th March 2009 at 03:22 PM.
Depending on how you've wired the tacho up, will affect its reading.
I think you mean you think your SPEEDO is out..... Which the tacho has nothing to do with....