Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 26

Thread: No Grunt

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Banned
    Join Date
    Dec 2008
    Posts
    790

    Default No Grunt

    Having trouble with the new JDM Levin, when I was buying it the 1st thing I noticed was that it was well down on power. I didnt buy her to wreck her so I just thought, Powers steering, Aircon & cat converter are prob sapping most of the power but its starting to annoy me.
    Heres the symptoms, no power off the line, rev to 4-5000 release the clutch & the car drops to about 800rpm before slowly picking up, goes fairly well above 4000 rpm. The car is unable to complete a dounut from a 6-7000 start.
    So far, I have checked the timing, used injector cleaner, cleaned the air filter, changed the plugs, removed the cat converter.
    Did notice a touch of oil on the dizzy tonight but I will attend to that.
    It drives like a car that has big cams except it has standard ecu & pulleys it idles/runs like a standard lump.
    Whats next,
    Check the fuel pressure, check the injectors, check for a vacuum leak (cant see one).
    Compression test even though there is no smoke & it drives well.
    Stick an F20c in as if

  2. #2
    Ok
    Join Date
    Nov 2008
    Name
    Seamus
    State
    QLD
    Location
    Milton
    Country
    Australia
    Posts
    1,860

    Default

    "rev to 4-5000 release the clutch & the car drops to about 800rpm before slowly picking up"

    ^this bit had me curious, is your clutch in any good shape??

    but yeah, your dizzy/dizzy cap could be fairly fried (especially if you have aftermarket headers and no heat-shield), coil/ignitor could be on its way out, timing could be off

    not many other things it could be imo, i think when rob's fuel pump started dying it had similar symptoms

    compression test is always a good idea, but i really don't think that it's the problem in this case

  3. #3
    Banned
    Join Date
    Dec 2008
    Posts
    790

    Default

    Im hoping its something easy like the fuel pump or even a clogged filter after the tank, the oil in the dizzy is minor but I will sort it asap, she seems to be firing well. The clutch is fine, driving up hills is a bastard just no torque.

  4. #4
    Ok
    Join Date
    Nov 2008
    Name
    Seamus
    State
    QLD
    Location
    Milton
    Country
    Australia
    Posts
    1,860

    Default

    ahh yep i see. definitely definitely change your fuel filter, especially if its a jap car (some of the small towns over in japan water-down their fuel, unfortunately this rusts the shit out of everything and in turn clogs the pump and/or filter)

    robo's fuel filter had a good teaspoon of j-shit come out of his filter when we first changed it


  5. #5
    Banned
    Join Date
    Dec 2008
    Posts
    790

    Default

    Will do, theres one back near the tank also? on a JDM car.

  6. #6
    Ok
    Join Date
    Nov 2008
    Name
    Seamus
    State
    QLD
    Location
    Milton
    Country
    Australia
    Posts
    1,860

    Default

    dont think so man, as far as i remember there's just the one in the engine bay, and the little filter-bag thing attached to the bottom of the fuelpump (inside the tank)

    someone with a better memory than mine will have to confirm

  7. #7
    Veteran NIZLAH's Avatar
    Join Date
    Dec 2008
    Name
    Niz
    State
    QLD
    Location
    South~Slide Briz
    Country
    Australia
    Posts
    1,077

    Default

    my mates bigport is like this also... very slug like till 4-4500 rpm then it pulls well, we havent worked out what it is though yet..... (he really couldn't be fucked as he is planning a motor swap soon)

    So I take it you threw that exhaust on mate? did you put it on as is or get that dent fixed?
    (not saying it has anything to do with your problem) Did all bolt up fine and all?
    ------------------>>>Need something welded locally??? Hit me up, I may just be able to help<<<------------------

    BENT MECHANIX - Garage 20:

  8. #8
    Banned
    Join Date
    Dec 2008
    Posts
    790

    Default

    Got the dent fitted but its about 3 inches short of all the mounting points, bizarre. Must get a section welded in.

  9. #9
    Veteran NIZLAH's Avatar
    Join Date
    Dec 2008
    Name
    Niz
    State
    QLD
    Location
    South~Slide Briz
    Country
    Australia
    Posts
    1,077

    Default

    hmm that is quite strange....
    Do you like the note of it?

    ------------ > Yeah my mate and I believe its a tvis issue.. just haven't been fucked enough to play around with it yet.
    ------------------>>>Need something welded locally??? Hit me up, I may just be able to help<<<------------------

    BENT MECHANIX - Garage 20:

  10. #10
    Ok
    Join Date
    Nov 2008
    Name
    Seamus
    State
    QLD
    Location
    Milton
    Country
    Australia
    Posts
    1,860

    Default

    a completely open/completely closed TVIS would still make the car "go alright" below 4000rpm, i really dont think it's that .. worth a try though i guess

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. pimping daihatsu hi-jet! 548cc of grunt! swaps
    By toddheart86 in forum Cars for Sale (Not Toyotas)
    Replies: 2
    Last Post: 22nd December 2012, 09:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •