Page 1 of 138 1 2 3 4 5 6 7 8 9 10 11 51 101 ... LastLast
Results 1 to 10 of 1375

Thread: pen15's slider could be lower wider louder

  1. #1
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default pen15's slider could be lower wider louder





    now this



    was this





    the specs are as follows

    suspension
    -up front GReddy coilovers
    -up the back GReddy coilovers
    -whiteline front strut brace
    -whiteline 24mm adjustable swaybar
    -cusco pillowball caster rods
    -rear adjustable panhard rod whiteline
    -19mm rear adjustable swaybar whiteline
    -t3 scratch built adjustable lower control arms
    -40mm rca's AJPS articles
    -t3 steering arms
    -t3 pillowball turnbuckle outer tierods

    engine
    -blackbox m1
    -7age 16v bigport
    -t3 bigport to ae101 quad throttle adapter
    -spool con rods
    -wiseco pistons comp is 12.37-1
    -ae101 silvertop quad throttles
    -t3 raw stacks
    -264 hks cam shafts at 8.1mm lift on intake and 8.35mm lift on exhaust
    -cast headers with custom secondary's
    -o2 sensor
    -highflow metal cat converter
    -2 1/2 inch straight through
    -dirty exit pipe
    -jap spec sprinter radiator
    -Bosch 044 intank pump

    oils
    -engine oil is royal purple 10w40
    -gearbox oil is royal purple 90w140 and a mix of 75w90 and a nulon oil stabilizer
    -diff oil royal purple maxgear 75w90

    drive train
    -tight t50 gearbox jdm
    -short shifter kit very nice kit Q's i think
    -sprinter tailshaft front section rear half is t18
    -t series koukie 1.5way TRD
    -4.77's techno pro spirit diff ratios
    -copper jap shifter rebuild kit
    -jdm brakes up front slotted and vented rotors
    -project mu pads up front
    -disc rear end with project mu drift rear pads
    -braided lines from front to back
    -stewert wilkins hydro handbrake
    -braided lines to above
    -willwood brake bias adjuster (in car)

    wheels
    - 14 by 8 -12 mk2's up front
    - 14 by 8.5 -10 mk2's at the rear

    tires
    - 185 60 r14 getting re001's up the front
    - 185 60 r14 triangles up the rear (good tires don't dlam at all)

    interior
    -bride zeta3 lowmax on bride rails to suit ae70
    -fake bride deicent copy passenger
    -nardi classic
    -d1 quick reliese steering wheel hub
    -autometer nexus gauges (oil press, water temp)
    -defi tacho
    -velo racing harness 4 point
    -jvc tv dvd headunit
    -gutted interior
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_0381.jpg 
Views:	304 
Size:	76.6 KB 
ID:	95   Click image for larger version. 

Name:	IMG_0382.jpg 
Views:	222 
Size:	75.6 KB 
ID:	96   Click image for larger version. 

Name:	IMG_0400.jpg 
Views:	385 
Size:	113.8 KB 
ID:	97   Click image for larger version. 

Name:	IMG_0430.jpg 
Views:	229 
Size:	59.0 KB 
ID:	98   Click image for larger version. 

Name:	IMG_0432.jpg 
Views:	364 
Size:	68.3 KB 
ID:	99  

    Click image for larger version. 

Name:	IMG_0434.jpg 
Views:	275 
Size:	79.3 KB 
ID:	100  
    Last edited by pen15; 16th July 2011 at 09:25 AM.

  2. #2
    Senior Member
    Join Date
    Dec 2008
    Name
    Dave
    State
    SA
    Location
    The Ghetto
    Country
    Australia
    Posts
    865

    Default

    clean, tidy build
    Last edited by Dave; 25th December 2008 at 06:41 PM.

  3. #3
    Veteran R&D Mechanical's Avatar
    Join Date
    Dec 2008
    Name
    Davey & Riki-lee
    State
    South Australia
    Location
    Seaford SA
    Country
    Australia
    Posts
    3,003

    Default

    yeeah nice build dude!


    any new plans with the car?

  4. #4
    Veteran R&D Mechanical's Avatar
    Join Date
    Dec 2008
    Name
    Davey & Riki-lee
    State
    South Australia
    Location
    Seaford SA
    Country
    Australia
    Posts
    3,003

    Default

    also any motor pics?!

  5. #5
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default


    cheers m8 appreciate it
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

  6. #6
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default

    got a bottom end i can get built up but considering my options cams in mind atm went for a slide last night and wasn't happy with the power in the dry need a set of them other than that getting my handling all set up wright

    also engine pic coming up it looks sorta stupid with earthing wires everywhere but its really responsive with it in

    also included is a pic of my gauges and dash setup
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_0387.jpg 
Views:	566 
Size:	83.9 KB 
ID:	264   Click image for larger version. 

Name:	Picture 001.jpg 
Views:	631 
Size:	73.6 KB 
ID:	265  
    Last edited by pen15; 27th December 2008 at 09:36 PM.
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

  7. #7
    Senior Member
    Join Date
    Dec 2008
    Name
    Brandon
    State
    QLD
    Location
    Blackwater
    Country
    Australia
    Posts
    307

    Default

    thats so fresh. looks mint as. is a nice build ay

  8. #8
    Veteran Clinton's Avatar
    Join Date
    Dec 2008
    Name
    Clinton
    State
    NSW
    Location
    Tweed Heads
    Country
    Australia
    Posts
    3,048

    Default

    mat you do know that earthing kit seriously wont do anything


    also with the money you paid to get that manifold made up you could of got itb's... did you realise that?
    Last edited by Clinton; 29th December 2008 at 12:14 AM.

    FTP.
    Quote Originally Posted by svenmate View Post
    I love how all the SA boys get on board
    Quote Originally Posted by Konakid View Post
    im driving out there with new hydro setup
    Quote Originally Posted by myke90 View Post
    haha i have the exact same picture from when i got my sportmaxx lol.
    Quote Originally Posted by Richard View Post
    whats with the drift rings? i know they are just a novelty but do they represent or signify anything?

  9. #9
    Senior Member Course_Out's Avatar
    Join Date
    Dec 2008
    Name
    Nat
    State
    NSW
    Location
    Newcastle
    Country
    Australia
    Posts
    659

    Default

    Looks hot - what's the specs on those wheels?

  10. #10
    Veteran pen15's Avatar
    Join Date
    Dec 2008
    Name
    Mathew
    State
    NSW
    Location
    Sutho Shire
    Country
    Australia
    Posts
    1,859

    Default

    wheels are 13 by 8.5 minilights

    update on engine pics with newly added airbox from my daily workhorse vr commie doing a post on how to D.I.Y all required is a couple of brackets and a block off plate and presto all done it looks fairly stock too runs smother with it in also btw this is the reason i didn't go itbs Clint cheers boys good to see some other people know a nice looking rolla when they see 1
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_0482.jpg 
Views:	369 
Size:	73.1 KB 
ID:	333   Click image for larger version. 

Name:	IMG_0483.jpg 
Views:	251 
Size:	62.4 KB 
ID:	334  
    the dyno pull to 300rwkw

    BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less

Page 1 of 138 1 2 3 4 5 6 7 8 9 10 11 51 101 ... LastLast

Similar Threads

  1. Sprinter00086's slider.. Now lower, wider and sexier :)
    By Sprinter00086 in forum AE86 Owners Forums
    Replies: 25
    Last Post: 9th December 2011, 05:21 PM
  2. pen15's stuff for sale
    By pen15 in forum Car Parts For Sale
    Replies: 6
    Last Post: 20th April 2011, 07:36 AM
  3. drift vids by pen15
    By pen15 in forum The Drift Channel
    Replies: 59
    Last Post: 18th May 2010, 08:25 AM
  4. pen15's tow slut!
    By pen15 in forum Other Rides
    Replies: 5
    Last Post: 18th April 2010, 08:58 PM
  5. pen15's ride
    By pen15 in forum KE70 / AE71 Owners Forums
    Replies: 8
    Last Post: 3rd October 2008, 06:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •