Thanks for that. Is there any type of heavy duty ones on the market or just your standard ones from Kelpro, Mackay etc.
Cheers
Correct.... but make sure u know whats happening with the loom. As u will be using a FWD loom.... parts of it will need to be extended for the RWD setup.
And make sure u know which lines from the fuel tank do what and go where with the fuel rail on the engine. (dont want to try pump fuel in backwards)
U'll also need to install a external fuel pump. A VL pump will do. Once again, make sure u know which fuel line from the fuel tank is the 1 that u add the pump to.
Its an esy swap if you plan EVERYTHING before u start.
Thanks for that. Is there any type of heavy duty ones on the market or just your standard ones from Kelpro, Mackay etc.
Cheers
TRD make some, i think u can get them from
Hey dude, I reckon if you want to put a 4AGE head onto a 4AC is going to be 3 times as hard as putting a 4AG staight into your car. it will be less time consuming and less work.
As for engine mounts. Cusco make some too. They are just identical to the TRD ones, and they are a little bit lower than the orginal engine mounts you can get from Toyota.
If you need some for your car, I am pretty sure I can still get some for you. I have just put some new one in my car... and also gearbox mount as well.
throw the 4ac away its useless