Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 27

Thread: How to remove the Stock Rear Bumper

  1. #1
    Senior Member Sprinterboy's Avatar
    Join Date
    Dec 2008
    Name
    Justin
    State
    DC
    Location
    Downtown
    Country
    USA
    Posts
    723

    Default

    Ok, for those of you that don't know hear is a little walk through on how to remove the stock rear bar off your sprinter (aus spec)

    You need to undo the bolts near the mudflaps and also take off the mud flaps(if fitted)


  2. #2
    Senior Member Sprinterboy's Avatar
    Join Date
    Dec 2008
    Name
    Justin
    State
    DC
    Location
    Downtown
    Country
    USA
    Posts
    723

    Default

    Now thats done pull up carpet(if you still have it) and remove the four (in total) rubber plugs



  3. #3
    Senior Member Sprinterboy's Avatar
    Join Date
    Dec 2008
    Name
    Justin
    State
    DC
    Location
    Downtown
    Country
    USA
    Posts
    723

    Default

    the ones on the other side


  4. #4
    Senior Member Sprinterboy's Avatar
    Join Date
    Dec 2008
    Name
    Justin
    State
    DC
    Location
    Downtown
    Country
    USA
    Posts
    723

    Default

    now you will need an 19mm soket with extension to undo these as they are pretty tight, we also used a bit of leverage to help


  5. #5
    Senior Member Sprinterboy's Avatar
    Join Date
    Dec 2008
    Name
    Justin
    State
    DC
    Location
    Downtown
    Country
    USA
    Posts
    723

    Default

    Undoing the bolts


  6. #6
    Senior Member Sprinterboy's Avatar
    Join Date
    Dec 2008
    Name
    Justin
    State
    DC
    Location
    Downtown
    Country
    USA
    Posts
    723

    Default

    Now you've done that there are two more, one on either side behind the trimming
    Hear is a pic with the bolt removed


  7. #7
    Senior Member Sprinterboy's Avatar
    Join Date
    Dec 2008
    Name
    Justin
    State
    DC
    Location
    Downtown
    Country
    USA
    Posts
    723

    Default

    and the other side


  8. #8
    Senior Member Sprinterboy's Avatar
    Join Date
    Dec 2008
    Name
    Justin
    State
    DC
    Location
    Downtown
    Country
    USA
    Posts
    723

    Default

    Then with a little wiggle you should be able to pull it off!


  9. #9
    Senior Member Sprinterboy's Avatar
    Join Date
    Dec 2008
    Name
    Justin
    State
    DC
    Location
    Downtown
    Country
    USA
    Posts
    723

    Default

    And this is how she will look after about 20min work(if that)


  10. #10
    Senior Member
    Join Date
    Dec 2008
    Name
    Paul
    State
    QLD
    Location
    Gold Coast
    Country
    Australia
    Posts
    212

    Wink

    Don't forget to unplug the plate lights as well.

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. how do you remove a stock 86 rear bar
    By hachi_dk in forum Technical - Questions
    Replies: 6
    Last Post: 14th December 2009, 11:20 PM
  2. [BNE] ADM AE86 stock rear bumper + Seats w/ Rails
    By PuGZoR in forum Cars or Parts Wanted
    Replies: 7
    Last Post: 28th April 2009, 07:48 PM
  3. Hot to remove Rear Bumper
    By Sprinterboy in forum Technical - Articles
    Replies: 6
    Last Post: 27th January 2009, 01:28 PM
  4. adm 86 stock front and rear bumper
    By DriftPlease in forum Car Parts For Sale
    Replies: 11
    Last Post: 2nd February 2008, 05:27 PM
  5. ae86 stock front and rear bumper.
    By Tristan in forum Cars or Parts Wanted
    Replies: 1
    Last Post: 29th April 2007, 01:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •