Results 1 to 7 of 7

Thread: Max power on stock B/P 4a injectors...

  1. #1
    Senior Member --Redwork--'s Avatar
    Join Date
    Jan 2009
    Name
    Jason
    State
    QLD
    Location
    Nundah
    Country
    Australia
    Posts
    954

    Default Max power on stock B/P 4a injectors...

    Basiclly wanna know if I need to upgrade my injectors on my B/P

    Engine has 10.6:1 comp.
    Ported head..
    288in and 272 ex cams...
    Extractors and 2.25 system...

    Guessing roughly around 160Hp...maybe 170 with a strong tune...

    Will standard 182cc injectors cover it.??
    Or should i get some 235cc small port ones.??
    Or go even bigger.?????

  2. #2
    Senior Member Sprinter86's Avatar
    Join Date
    Dec 2008
    Name
    Nathan
    State
    VIC
    Location
    Lilydale
    Country
    Australia
    Posts
    701

    Default

    you can run any injectors you like when you have aftermarket ECU. the bigger the better really. You can always tune the injector pulse signal length to suit the fuel flow from the injectors.

    On a side note, i think i have some smallport injectors here...

  3. #3
    Veteran Jonny Rochester's Avatar
    Join Date
    Dec 2008
    Name
    Jonathan
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,660

    Default

    ... but every injector has its limit, like when you get to 100% duty cycle, the only other thing is to up the fuel pressure.

    There is a rough way of calculating injector size needed. Maybe someone can search and find, or even write it themselves. There is a cirtain amount of petrol needed per kw of power (assuming fuel ratios and efficiency of the motor you have). Once you have this number, then it's easy to calculate the injector size if you know your final power output, and the max duty cycle you want to run the injectors.

    No numbers sorry... someone else can do the work.

  4. #4
    Senior Member Anthony's Avatar
    Join Date
    Nov 2008
    Name
    Anthony
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    831

    Default

    very roughly its 20hp per 100cc of injection, at the flywheel.

    May do it at a push with some pressure thrown in, but theyre not that good an injector anyway. I'd get a set of yellow/greens from a 7MGE or 1GGTE (285cc). Get all 6, have them tested and match a set of 4.

    The ultimate injector for that setup would be a very late top feed 4 or 6 hole. from non turbo caldina (290) or beams altezza (345) etc. these injectors give you power for free. For example I can squeeze more hp out of a set of beams 345cc injectors than a set of 4agze 370s. at the same pressure.

    btw, i have all of these injectors available for sale. PM me if you would like more info.
    Last edited by Anthony; 9th March 2009 at 01:25 PM.

  5. #5
    Veteran Jonny Rochester's Avatar
    Join Date
    Dec 2008
    Name
    Jonathan
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,660

    Default

    So 20 x 1.82 x 4 = 145.6hp = not enough


    Anthony, for N/A 20v for "200hp" (same as everyone on the forumz has) are the stock injectors fine or is it worth going to the 1JZ-GTE injectors? 380cc I think.

  6. #6
    Senior Member Anthony's Avatar
    Join Date
    Nov 2008
    Name
    Anthony
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    831

    Default

    for an NA setup I think the stock injectors are fine John.

  7. #7
    Senior Member --Redwork--'s Avatar
    Join Date
    Jan 2009
    Name
    Jason
    State
    QLD
    Location
    Nundah
    Country
    Australia
    Posts
    954

    Default

    Cool guys...

    I did a very rough calulation and I think stock ones will juuuusst handle it...
    If not Anthony will be gettin a visit

    I like the sound of free power though...

Similar Threads

  1. [SA] 4A-GE Fuel injectors
    By eS22 in forum Cars or Parts Wanted
    Replies: 4
    Last Post: 11th September 2012, 02:46 PM
  2. Max streetable power out of a bt 20v
    By adrian_809 in forum General Topics (No Technical Questions)
    Replies: 25
    Last Post: 6th May 2010, 10:09 PM
  3. MAX WHEEL SIZE FOR STOCK GUARDS
    By damo46 in forum Technical - Questions
    Replies: 15
    Last Post: 1st May 2008, 06:43 PM
  4. No power to injectors
    By samuek in forum Technical - Questions
    Replies: 2
    Last Post: 28th January 2008, 04:08 PM
  5. 7MGE injectors for turbo 4A?
    By Mattysshop in forum Technical - Questions
    Replies: 2
    Last Post: 26th August 2006, 11:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •