i bought ra40 control arms the other day
would i need to adjust the tie rod ends or the shaft that connects to the steering rack?
10mm track each side increase
no u dont need ra40 tie rods
i bought ra40 control arms the other day
would i need to adjust the tie rod ends or the shaft that connects to the steering rack?
You need longer tie rods apparently for ra40/65 LCA's
85' JDM TA63 GTTR sedan - Godlike
89' JDM GZ20 Soarer - 1jz + R154 bus
Originally Posted by joeschmo_57
can you confirm that?
repco tie rods ends ra40 - $21 from 29 w00t big savings
Right now no i cant - its raining
Im sure truenosedan or some one whos using them will tho
85' JDM TA63 GTTR sedan - Godlike
89' JDM GZ20 Soarer - 1jz + R154 bus
Oh and Poh - are u goin to use ra40 brakes too? I would love to see someone actually take pics while doin said conversion.
85' JDM TA63 GTTR sedan - Godlike
89' JDM GZ20 Soarer - 1jz + R154 bus
... Okay, some one seriously needs to do a tech artical on the sigma control arm mod coz i get sooooooooo confused....
so far i think i need the arms and RA40 tie rod ends...
i feel like such a n00b, but it's confusing as hell!
-=Back by popular demand=-
Yes Sigma arms WILL require RA40 tie rods however im unsure weather RA40 amrs require longer tie rod.
XT130 corona arms will NOT require longer tie rods.
85' JDM TA63 GTTR sedan - Godlike
89' JDM GZ20 Soarer - 1jz + R154 bus
Tech article now theres an idea....
85' JDM TA63 GTTR sedan - Godlike
89' JDM GZ20 Soarer - 1jz + R154 bus
thats where you are half correct...
you also need the ra40 adjuster tube...
which might only cost $20 or so, but would take an hour of your time by the time you get to the wrecker etc.....
the ends are only half the deal....
pics of what? it is a lower control arm...
Posting Permissions
