hey all i thought i would start a new thread for my car. this is because my on one was clutted with my old and new car.
so anyways here it is. for some strange reason its exactly the same colour as my old one. i swaped apnnels over and shit and its the same, weird.
SPECS:
RUNNING GEAR:
motec m48
custom loom and all new sensers
4agze
collect turbo manafold + braided oil/water lines and fittings
gt28rs turbo
400 x 300 x 75 intercooler
SUSPENTION:
kyb agx front shocks (short stroke 4 way adjustable)
kyb agx rear shocks (short stroke 8 way adjustable)
koni coilover sleve kit
8kg ajps front springs
6kg ajps rear springs
whiteline adjustable Panhard rod
T3 35mill rca
Whiteline 24mm front sway bar
Whiteline18mm rear sway bar
sigma control arms
tarago rear end (big and beafy, has a 4:1 center or something liek that)
Body:
trd wing
car is fully spot welded
15x7 mesh rims
striped interior
full roll cage
STOPPING:
stock front brakes
tarago rear drums
braded front brake lines
other shit i have to be installed:
T3 camber tops
T3 upper hat system
front strut braces
eletric water pump and controller
fiber glass fixed back dride seat
revolution race gear side mounted alloy seat rails
hks copy bov (not sure if im gona install this or not
10inch thermo fan
METAL CAT
sr20 oilcooler and relocation kit
street body kit
custom surge tank
bosh in tank fuel pump
bosh in line fuel pump
dashmatt
have all the shit i need to relocate battery to the boot or were eva i want it
there is probably more but have forgoten
thing that i need to do before the car gets on the road:
wiring
piping
zorst
interior
mod the dash
pad the cage
fuel system
sort out all the spark system
handbrake
bleed the brakes and clutch
put bonnet and gards back on
get a radiator that fits
fit the kit
get front tow hooks
get brackets for the handbrake (were cut of for some farket up reason)
get t18rear half of the tail shaft
fill the holes in the floor were the bungs are missing
ignition barrel
new door locks
+ install all the shit that i mentioned above.
i would like to thank my mate adam for helping me swap most the shit from my old shell to this new one
also brett for helping me out with a fair bit
and jason for helping out with the wiring
well here is what most people want PICS!!!
this is what it looked like when i got it, its a little dirty.
[attachment=3093:attachment]
[attachment=3092:attachment]
hole car is seam wilded and here is what some looks like.
[attachment=3094:attachment]
can sorta see waht the colour looks like here.
[attachment=3095:attachment]
here is the mini tubd rear gard, it looks like its dented and crap from the light but its not.
[attachment=3096:attachment]
this is the custom dahs set up thingy that the previous owen was gona use, its all removed now but was some what a pain.
[attachment=3097:attachment]
here is how the cars were set up when swapping all the crap ova, the one out side is the old car.
[attachment=3098:attachment]
more pics to come.
removing the motor
[attachment=3099:attachment]
[attachment=3100:attachment]
[attachment=3101:attachment]
motor going into new car. the dude in the pic is my mate adam, helped me out heeps
[attachment=3102:attachment]
in da new car.
[attachment=3103:attachment]
[attachment=3104:attachment]
some random pics.
relay diagram on my old destroyed ford lazer.
[attachment=3105:attachment]
[attachment=3106:attachment]
[attachment=3107:attachment]
[attachment=3108:attachment]
me doing something, little dirty.
[attachment=3109:attachment]
when the loom and shit was first throw into the car.
[attachment=3110:attachment]
what it looks like now, still gota tidy it all up but its better than what it was.
[attachment=3111:attachment]
pics of the cage.
[attachment=3112:attachment]
[attachment=3113:attachment]
test fit on manafold and turbo.
[attachment=3114:attachment]
will post up pics later of what it all looks like panted and all lines and shit connected.
last lot of pics tonight, just some pics of parts that ive installed or to be installed
[attachment=3117:attachment]
[attachment=3116:attachment]
[attachment=3115:attachment]
[attachment=3120:attachment]
[attachment=3119:attachment]
[attachment=3118:attachment]
[attachment=3121:attachment]
cbf adding any more pics. maybe at a later date as is 3:15am and i just finished work.
ahh stuff it may as well add these few, what the car looks like atm.
[attachment=3123:attachment]
[attachment=3122:attachment]
[attachment=3124:attachment]
WOW!...........
looks hot as,keep pics coming
ROYAL GARAGE NEWCASTLE
few more pics
seat.
[attachment=3127:attachment]
seat rail.
[attachment=3128:attachment]
fuel pumps.
[attachment=3129:attachment]
gard i need to fill, bad angle
[attachment=3130:attachment]
updated bay shot.
[attachment=3131:attachment]
and lastly a better pic of the side.
[attachment=3132:attachment]
so yeah let mw what you think all and if you can help me out in some way with the rest of the shit i need to do plz let me know. i want to get my car oon the road
Looks awesome
the surface rust on the metal work seems to have set in quick
All in all looks tough
iain
Posting Permissions
