Page 6 of 6 FirstFirst 1 2 3 4 5 6
Results 51 to 57 of 57

Thread: Oil cooler setup

  1. #51
    Senior Member
    Join Date
    Mar 2010
    Name
    Rory
    State
    SA
    Location
    Adelaide
    Country
    Australia
    Posts
    283

    Default

    Thanks again JR. Actually saw what you said in the previous post about running the line from the oil pressure sender hole to the turb. That sounds the better option I reckon. Then setup the 4afe cooler as per this thread...

    Would the oil cooler reduce coolant and overall engine temperature as a residual result? You would think....

    R

  2. #52
    Senior Member
    Join Date
    Mar 2010
    Name
    Rory
    State
    SA
    Location
    Adelaide
    Country
    Australia
    Posts
    283

    Default

    Another question regarding this setup.
    Would this cooler be ok using a full flow sandwich plate instead of the stock item and sump?

    R

  3. #53
    Veteran dr1ft-pig's Avatar
    Join Date
    Dec 2008
    Name
    Brendan
    State
    QLD
    Location
    NORTHSIDE YO
    Country
    Australia
    Posts
    4,116

    Default

    here is what sandwich plate looks like on rwd 20v setup... as you can see you will have to run oil line through engine mount... sound dodgy but looks the goods
    MY JZX83 (clicky)
    My Beams Powered AE86 SOLD (clicky)

    Quote Originally Posted by destroyer View Post
    Too bad im in the same town as dr1ft-p1g im pretty sure his mx83 is the coolest.

  4. #54
    Veteran Jonny Rochester's Avatar
    Join Date
    Dec 2008
    Name
    Jonathan
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,660

    Default


    I would say no. Because the stock oil cooler is used at low pressure with normal rubber hose and spring clamps or hose clamps.

    So if you want to use the stock cooler at full oil pressure, you would have to weld on propper screw fittings. Maybe good hose and hose clamps done up tight would do it. But if it fails, that's ALL of your oil and oil pressure gone.

    And for turbo oil suply, you need to think about oil pressure and volume. Some turbos don't like full pressure, and you need to put a jet in the line.

  5. #55
    Member KuRt's Avatar
    Join Date
    Apr 2009
    Name
    Kurt
    State
    QLD
    Location
    Gold Coast
    Country
    Australia
    Posts
    57

    Default

    can you run the remote oil filter lines into a oil cooler thats what i was going to do???

  6. #56
    Veteran dr1ft-pig's Avatar
    Join Date
    Dec 2008
    Name
    Brendan
    State
    QLD
    Location
    NORTHSIDE YO
    Country
    Australia
    Posts
    4,116

    Default

    yes u can callum, not with this setup though, well maybe but not worth fucking round
    MY JZX83 (clicky)
    My Beams Powered AE86 SOLD (clicky)

    Quote Originally Posted by destroyer View Post
    Too bad im in the same town as dr1ft-p1g im pretty sure his mx83 is the coolest.

  7. #57
    Senior Member
    Join Date
    Sep 2010
    Posts
    113

    Default

    anyone have a proper write up with pics?

Page 6 of 6 FirstFirst 1 2 3 4 5 6

Similar Threads

  1. Oil Cooler Setup
    By topher in forum General Topics (No Technical Questions)
    Replies: 1
    Last Post: 28th June 2010, 09:33 PM
  2. Oil cooler setup
    By hillclimb86 in forum Car Parts For Sale
    Replies: 4
    Last Post: 19th October 2009, 04:26 PM
  3. 20v oil cooler setup
    By sprint86 in forum Technical - Questions
    Replies: 15
    Last Post: 24th July 2009, 09:58 AM
  4. Oil cooler setup
    By drft86 in forum Car Parts For Sale
    Replies: 1
    Last Post: 26th June 2008, 06:26 PM
  5. 4age oil cooler setup
    By ke25 racer in forum Car Parts For Sale
    Replies: 0
    Last Post: 24th April 2007, 09:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •