i think EFI hardware make a setup for the 4age maybe give them a call
Hey guys,
I did a search but couldn't find anything, I think the stuff I am thinking off is possibly on the old forum.
I'm wanting to know if there are any larger throttle bodies that can be bolted on with minimal mods. Obviously I will need to run the same TPS for everything to work.
If anyone knows of any that are direct fit for a JDM bigport 4AGE.
Cheers.
i think EFI hardware make a setup for the 4age maybe give them a call
a 3SGE will be minimal mods 65mm? size
a xf falcon throttle body (requires map sensor) 75mm size
a landcruiser will work little bit of pfaffing about with it though 70mm size
a V6 camry one cant remember if it just bolts up though 65mm size
a 3rz one will work at 70mm? size
gtir?
i used a v6 camry throttle body on my smallport. its a 3inch one, same as sr20 size.
barely clears the trueno bonet tho !!
lol at white people in japan. just lol.
i think lawson was talking about using 4 of 6 gt-r throttle boddies on a 4age as quads.. it has been done before.
lol at white people in japan. just lol.
Why would you want to change it..??
Unless you have a crazy engine there is apparently almost no gain to be had from running a bigger throttle body...
your wright there is no gain al all of running a bigger throttle on a 4age but 4agte or 4agze maby but even then why bother with a bigger throttle body upgrade something else for a little more go
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
So you've guys have done it and tested flow rates? I doubt there would be zero gain.
The next step for me is a rebuild, so I don't know really why I would rather spend 2-3k on a rebuilt or $50 on a slightly larger throttle.