id be checking your wiring twice then gettin a new x4 box, only had an issue one time with all mine!
i seem to have no spark with my microtech set up.
it ran fine with the stock computer but now i have no spark. im running a lt 10s with the x4 ignitor, stock sr coils everything is wired up as per microtech diagram, orange cas light flashing when cranking, no warning lights, map sensor feed. im running out of ideas... coils have power feed, seprate common earth, microtech and x4 is earthed properly.
anyone have any ideas? im stumped.. about ready to put the stock computer back in..
id be checking your wiring twice then gettin a new x4 box, only had an issue one time with all mine!
AE86 THE BEST
wish my car was built already...
we
need
to
trade
paint
on
the
track...
cant wait to go head to head haha
The microtech's have issues with bad earths, i experienced this with mine, and i am on second x4 box.
I will finish ,One day.
well, still havent heard it run yet, but all coils are sparking, and everything else seems to be working.
heres some updates on the rest of the car.
fuel pumps and surge tank are mounted on a plate thats rubber mounted to the body.. try to get the volume down a little...
rear guards are finished, dihatsu charade front guards chopped and welded onto the body.. still a litttle dodgy but eh.
el falcon thermo fans are mounted and working a treat!
new unmolested gearbox fitted and ready to be destroyed haha
now just waiting for s13 crosmember so i can get better steering geometry and better steering rack.. an will be on the reassembly again.
oh yea, i forgot.. finished my lexan rear windows. not perfect.. but good enough. lol
Charade guards are fat!!! :-)