Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Zenki levin lip on kouki front bar- How i did mine

  1. #1
    Senior Member ae86=fun's Avatar
    Join Date
    Dec 2008
    Name
    Tobias
    State
    TAS
    Location
    Battery Point
    Country
    Australia
    Posts
    154

    Cool Zenki levin lip on kouki front bar- How i did mine

    I got hold of a zenki lip for my car.
    So i thought i would do a tech article of how i put in on.

    Things you need:

    6 X 40mm long bolts
    6 X large washers to suit above bolts
    6 X small washers to suit above bolts
    6 X nuts to suit above bolts
    about 200mm of fuel hose round 8mm ID.

    here we go
    grab your zenki lip, tidy it up if need be with some bog and paint( mine was a bit scrappy)


    get your front bar off you car and chuck it on your work bench.


    You'll need to drill holes in the bottom of you front bar. it best to star in the middle, where there are two existing holes/tabs in the lip.


    Now measure the distance between the bottom of the lip and the tab where you will be putting the bolt through.
    Using the fuel hose cut a spacer to suit,(the middle two "spacers" were cut at approx 27mm for mine).Making it slightly larger than needed is okay as the hose will compress as you tighten it up.


    Put a bolt through with a washer on the bottom and same for the other side. and screw them tight so that the lip lines up on the bar.


    Now repeat the same process at the rear most part of the lip, be sure to check the line at which the lip lines up with the bar.( you can see it in the back ground of this photo( sorry for gay pic)


    Now once the rear two spacers have been put on, drill holes for the last two which will sit roughly in the corner of the lip(foreground of above pic), these will help keep the lip stable.

    You should end up with something like this.Paint/ wash it.....do what you got to do.


    Then put it back on your car!!!

    WINNA

  2. #2
    Senior Member sun_moon's Avatar
    Join Date
    Feb 2009
    Name
    gay
    State
    n1gger land
    Location
    n1gger land
    Country
    south korea seoul
    Posts
    957

    Default

    agreed !
    lol at white people in japan. just lol.

  3. #3
    Senior Member RolandGTV85's Avatar
    Join Date
    Dec 2008
    Name
    Roland
    State
    WA
    Location
    Bassendean
    Country
    Australia
    Posts
    372

    Default

    looking good =P

  4. #4
    Bad Email Address
    Join Date
    Dec 2008
    Posts
    636

    Default

    very nice.....! I love that look on hachis'

  5. #5
    Senior Member H8CHIR6KU's Avatar
    Join Date
    Dec 2008
    Name
    Aaron
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    987

    Default

    looks good toby. nice write up too.

    do my build thread for me????

  6. #6
    Senior Member ae86=fun's Avatar
    Join Date
    Dec 2008
    Name
    Tobias
    State
    TAS
    Location
    Battery Point
    Country
    Australia
    Posts
    154

    Default

    Man it took so long to upload the pics(internets being dodgy).
    May as well. Been there for most of the build. Lol
    GO THE NEW SIG! Looks good.

  7. #7
    Senior Member H8CHIR6KU's Avatar
    Join Date
    Dec 2008
    Name
    Aaron
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    987

    Default

    tk ftw

  8. #8
    Senior Member awang's Avatar
    Join Date
    Dec 2008
    Name
    Zul
    State
    Brunei
    Location
    Stone City
    Country
    Brunei
    Posts
    433

    Default

    do you have to remove the headlight when taking off the front bar? sorry if this is a bit off

  9. #9
    Senior Member awang's Avatar
    Join Date
    Dec 2008
    Name
    Zul
    State
    Brunei
    Location
    Stone City
    Country
    Brunei
    Posts
    433

    Default

    got it, dont worry

  10. #10
    Senior Member Matt-AE86's Avatar
    Join Date
    Dec 2008
    Name
    Matt
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    971

    Default

    I did the same. then it ripped off, so I zip tied it, I'll probably do this again though. Cheers.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Wtb: levin kouki front bar with lip
    By Tinz in forum Cars or Parts Wanted
    Replies: 3
    Last Post: 15th November 2012, 08:59 PM
  2. swap zenki trueno frnt lip for levin front lip
    By dove grey 64 in forum Car Parts For Sale
    Replies: 5
    Last Post: 10th September 2012, 08:13 AM
  3. Topstage Lip to suit Levin Zenki Bar (mint cond.)
    By WAcky in forum Car Parts For Sale
    Replies: 8
    Last Post: 29th April 2010, 03:36 PM
  4. SA - JDM Zenki front bar with lip, levin foggie brackets
    By Touge Boy in forum Car Parts For Sale
    Replies: 6
    Last Post: 5th September 2009, 03:31 PM
  5. zenki lip to kouki trueno bar
    By BLACK COUPE in forum Technical - Questions
    Replies: 2
    Last Post: 21st February 2009, 08:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •