stop the nut on the other side from spinning
hi guys i attempted to remove my front guards to give it a quick spray can job and i managed to remove all the bolts except 1 which is down the bottom.
at the bottom theres 2 bolts about 1 or 2 inches away from each other..i cant seem to undo the bolt that is closer to the door.it just turns and turns and turns but it doesnt actually come out..i tried to pul it out with a pair of pliers but was unsuccessful..anyone got any ideas?..im pretty sure thats the last bolt that i have to undo because the guard was actually falling off already but without undoing the mentioned bolt it wont actually come out.
stop the nut on the other side from spinning
dont think it'll work though coz the one on the opposite guard came out straight away
u might have to remove the nut with force or angle grinder
30kw club
lol dont anyone know how to remove bolts? just drill it, then rethread it
I had same problem, pissed me right offf,one side got stuck and one snaped off
apply force with a flat blade screwdriver forcing the bolt out while turning the bolt with the spanner/rachet.
i had that problem tooo. fucked pissed me off. imo just do watever it take as long as there is one hold it on the bottom it should be good. angle grind it. nice and quick.
Originally Posted by cicca_294
my dads mate is getting one, in white, aus delivered.
his mate has an imported on in white,
and their mate has a blood red one with a 25k new exhaust system...
i wish i had enough money for a freaking corolla
i just cut the wire for the aerial when i was getting it out, not like i have any audio anyway...