Well thought it was time that i added my car to the list so you guys and girls can check it out.
I bought it back in 2003. i was after any ae86, this one came up with a conversion already done. i quickly snapped it up for a really low price. the guy i bought it off didnt really know much bout the car, good for me bad for him.
bout a month later i had spun two main bearings, time for a rebuild. ITS STILL OFF THE ROAD!!!! i have decided to improve the car in all areas.
So heres what it was like currently:
Red ADM AE86
Engine: AE92 bigport 4agze CAS, DLI
Rebuilt engine and head
Custom crank pulley - 17mm (roughly 14psi)
mircotech LT10s ECU with X4 box
Bosch coils x4
Supra front mount
2.5 inch exhaust and extractors
Bosch 070 pump
Xtreme 4 puck clutch
Trans: JDM T-50
diff: JDM T series, aftermarket LSD. Unsure of brand yet
Front SUS: Custom coilovers featuring RA60 strut, KYB short stroke, AJPS 7kg springs
30mm RCA
86 PS arms
XT130 LCA - new bushes and balljoints
Rear SUS: RSR springs, TRD green short shocks. 8 way adjustable. complete new bushes.
Front brakes: S14 4 piston calipers
s14 Slotted rotors
Rear brakes: JDM Disc rear end
I don't have anypics of what it was like when i got it. but imagine a red lowered 86. youve all seen em
Pics and heaps of parts and info to come....NOW
I have rebuilt the engine, which you can review in this thread
and its now fitted in the engine bay again
well i test fitted the front end today. this is basically what its going to look like. the threaded sleeve hasnt been welded on yet, and the strut hasnt been cut. but you get the general idea.
this is the ride height with a TRX rim on there. the seat is bout half way up the thread
and some cusco camber tops
oh yeah, here are some pics of the brake setup.
it consists of:
- s14 callipers and discs (disc redrilled)
- st141 strut. (the calliper mount is right, no adaptor needed)
- cruzida spec calliper spacer
also, i got a kit for the braided brake lines and went to outlaw speed shop to get the banjo bolts.
Nice I love hachi builds. heheh
Keep up the good work.
awesome stuff man.... keep it updated..
got almost all of the fuel system done now.
consists of a VL pump with a carby lift pump.
]My Webpage[/url]
looking good man, looks like a little weapon.keep the updates coming.
cant wait for my drive...grins!