Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: BT igniter and coils

  1. #1
    Member dodgybrooks's Avatar
    Join Date
    Dec 2008
    Name
    Stephen
    State
    QLD
    Location
    Townsville
    Country
    Australia
    Posts
    35

    Default BT igniter and coils

    Put my 20v in yesterday and realised that I forgot to claim the igniter and coil setup from the donor car before it got crushed. I checked today and Toyota have a couple of each in stock in Melbourne but they want genuine part (read: genuinely expensive) prices for them. I asked the parts guy at Toyota and he said that the same setup "may" have come out on the Hilux, can anyone confirm this? I wanna try and find some at the wreckers, so if anyone knows what other cars shared them tell me!! Or if anyone has gone aftermarket management and wants to get rid of theirs then sell them to me!!
    Part numbers are
    Ignitor 8962112050
    Coil 9091902197

  2. #2
    Senior Member Sprinter86's Avatar
    Join Date
    Dec 2008
    Name
    Nathan
    State
    VIC
    Location
    Lilydale
    Country
    Australia
    Posts
    701

    Default

    hey mate,

    i have a coil and ignitor if you need them, they are from a silvertop though, i will check part numbers when i get down to the factory they are at, and let u know.

    nath

  3. #3
    Member dodgybrooks's Avatar
    Join Date
    Dec 2008
    Name
    Stephen
    State
    QLD
    Location
    Townsville
    Country
    Australia
    Posts
    35

    Default

    Wicked. Yea check those numbers and hook a bloke up.

  4. #4
    Veteran Jonny Rochester's Avatar
    Join Date
    Dec 2008
    Name
    Jonathan
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,660

    Default

    Silver top is the same.

    I happen to have in my hand, a spare coil and igniter:
    Coil 90919-02197
    Ignitor 89620-35300
    Both from a 22R carby HiLux from memory, setup to run off a mechanical advance/electronic dizzy. You have to double check with Anthony to see if this igniter will work for you.

  5. #5
    Senior Member rallystanza's Avatar
    Join Date
    Dec 2008
    Name
    Jeremy
    State
    Vic
    Location
    Melbourne
    Country
    Straya
    Posts
    250

    Default

    I have a spare coil from a blacktop but it doesnt mean jack. I used an aftermarket bosch electronic coil and it all works fine.

  6. #6
    Member dodgybrooks's Avatar
    Join Date
    Dec 2008
    Name
    Stephen
    State
    QLD
    Location
    Townsville
    Country
    Australia
    Posts
    35

    Default

    What did it cost you and what are the part numbers?

  7. #7
    Senior Member Anthony's Avatar
    Join Date
    Nov 2008
    Name
    Anthony
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    831

    Default

    yeah you can use almost any coil, but coil leads can be tricky with 20Vs. igniter has to be the right one really. the IGF signal changes style/shape a bit through the years and if you dont match it up you can get some running issues.

  8. #8
    Veteran Jonny Rochester's Avatar
    Join Date
    Dec 2008
    Name
    Jonathan
    State
    TAS
    Location
    Hobart
    Country
    Australia
    Posts
    2,660

    Default

    Your 20v coil is the same as on:
    SW20
    JZA80
    SXV10
    most HiLux
    Lexus 1UZ

    Your igniter is the same as:
    LS400 1UZ (2 are used)
    and a bunch of similar vehicles as listed above

    You just have to walk around the wrecking yard.

  9. #9
    Senior Member Anthony's Avatar
    Join Date
    Nov 2008
    Name
    Anthony
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    831

    Default

    well its not quite as simple as that. I can tell you for instance that SW20 changes connector shape AND igf style through its lifetime on the ignter as well as coil plug and retainer clip shape on the coil sode of things., at the very least between gen 2 and gen 3. 1uz does similar things as well.

    that list is a good starting point though just make sure you have a sample, dont just order over the phone, you may be disapointed.

  10. #10
    Senior Member Sprinter86's Avatar
    Join Date
    Dec 2008
    Name
    Nathan
    State
    VIC
    Location
    Lilydale
    Country
    Australia
    Posts
    701

    Default

    im sending him the factory 20v coil and ignitor tommorow.

    are you sure 1uz are so different? the 20v coil and ignitor plugged straight into a friends 1uz.... Exacly the same. there may of course be different types for different year motors. this was a 93.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. 1NZ/1ZZ coils and 20V motors/igniter/coils
    By 70XIN in forum Technical - Questions
    Replies: 17
    Last Post: 24th March 2020, 07:44 PM
  2. Microtech lt10s with igniter and coils Bris
    By toyotakraze in forum Car Parts For Sale
    Replies: 4
    Last Post: 27th September 2010, 08:16 PM
  3. Ae92 4agze twin coils leads and igniter (Briz)
    By toyotakraze in forum Car Parts For Sale
    Replies: 5
    Last Post: 26th July 2010, 06:26 PM
  4. Duel igniter - Can it run 4 coils?
    By Jonny Rochester in forum Technical - Questions
    Replies: 5
    Last Post: 31st August 2009, 10:58 PM
  5. igniter wires ?
    By loc33e in forum Technical - Questions
    Replies: 3
    Last Post: 2nd May 2008, 11:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •