Results 1 to 8 of 8

Thread: [BNE] ADM AE86 stock rear bumper + Seats w/ Rails

  1. #1
    Senior Member PuGZoR's Avatar
    Join Date
    Feb 2009
    Name
    Andy
    State
    QLD
    Location
    Thornlands
    Country
    Australia
    Posts
    528

    Default [BNE] ADM AE86 Grill + Seats w/ Rails

    Hey boys and girls,

    After a few things... Realised that these are two of my biggest problems, and will save me money if I just buy the bastards outright.

    Basically I would like...

    Stock AE86 rear bumper! Will consider buying a front and rear bumper set if someone wants to keep it together, but yeah. Don't wanna spend a million bucks, but do want one. Will put my kit on later when it's less likely to get fk'd learning to slide. Acquired

    Aussie spec AE86 Grill. Doesn't need to be awesomes condition, as long as it's one piece with as few cracks as possible. I have one but is in ultra poor condition. Yeah?

    Seats with rails. As long as they're bucket and will bolt into an AE86, I care not. Again, not wanting to spend a million bucks, just something that fkn fits. No universal rails or whatever, it must be bolt in. Fixed back I can deal with, but reclinable is preferable.

    In Brisbane, PM or reply on here, or my mobile is 0422481815. TXT only during business hours, outside of that ring me or whatever. Will travel if the price is right.
    Last edited by PuGZoR; 19th March 2009 at 10:01 AM.

  2. #2
    Veteran johl's Avatar
    Join Date
    Dec 2008
    Name
    Johl
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    2,812

    Default

    hey mate come get my rear bumper. comes with a free front bumper tho. $20 sound good?
    stroked 2L ca18-ae86 in the build...eta xmas 2012?

  3. #3
    Senior Member PuGZoR's Avatar
    Join Date
    Feb 2009
    Name
    Andy
    State
    QLD
    Location
    Thornlands
    Country
    Australia
    Posts
    528

    Default

    Done deal. PM sent.
    The Phoenix; In the build since 10/06!
    :: 4A-GTE / GT2560R / W58 / TRD 2-Way / F Series Diff / Microtech LT10S / AJPS Supplied Suspension ::
    Where will it stop? Will it ever be finished? How will it go? Why am I not wearing any pants?

  4. #4
    Senior Member PuGZoR's Avatar
    Join Date
    Feb 2009
    Name
    Andy
    State
    QLD
    Location
    Thornlands
    Country
    Australia
    Posts
    528

    Default

    Yay, picked up bumpers from Johl this morning. Not mint, but price was good and they will serve their purpose well. *Dr Evil pose*

    Added to my list of wantie bits is a stock ADM AE86 grill. Mmmm. Grill. *drools*
    The Phoenix; In the build since 10/06!
    :: 4A-GTE / GT2560R / W58 / TRD 2-Way / F Series Diff / Microtech LT10S / AJPS Supplied Suspension ::
    Where will it stop? Will it ever be finished? How will it go? Why am I not wearing any pants?

  5. #5
    Senior Member PuGZoR's Avatar
    Join Date
    Feb 2009
    Name
    Andy
    State
    QLD
    Location
    Thornlands
    Country
    Australia
    Posts
    528

    Default

    Still looking...
    The Phoenix; In the build since 10/06!
    :: 4A-GTE / GT2560R / W58 / TRD 2-Way / F Series Diff / Microtech LT10S / AJPS Supplied Suspension ::
    Where will it stop? Will it ever be finished? How will it go? Why am I not wearing any pants?

  6. #6
    Senior Member PuGZoR's Avatar
    Join Date
    Feb 2009
    Name
    Andy
    State
    QLD
    Location
    Thornlands
    Country
    Australia
    Posts
    528

    Default

    Still need...

    1) Aussie spec AE86 Grill. Doesn't need to be awesomes condition, as long as it's one piece with as few cracks as possible. I have one but is in ultra poor condition. Yeah?

    2) Seats with rails. As long as they're bucket and will bolt into an AE86, I care not. Again, not wanting to spend a million bucks, just something that fkn fits. No universal rails or whatever, it must be bolt in. Fixed back I can deal with, but reclinable is preferable.
    The Phoenix; In the build since 10/06!
    :: 4A-GTE / GT2560R / W58 / TRD 2-Way / F Series Diff / Microtech LT10S / AJPS Supplied Suspension ::
    Where will it stop? Will it ever be finished? How will it go? Why am I not wearing any pants?

  7. #7
    Veteran 44GTE's Avatar
    Join Date
    Nov 2008
    Name
    Craig
    State
    QLD
    Location
    Upper Caboolture
    Country
    Australia
    Posts
    2,235

    Default



    Hi Pugzor

    Have a set of Blue ADm seats if interested amd also an ADM grille.

    Give us a call

    Cheers Craig


    Contact No: 0408998795

    EMAIL: justjdmimports@bigpond.com

    LINK TO MY WEBSITE FOR MORE PARTS & PICS http://www.justjdmimports.com

    Link to My ride Thread http://www.ae86drivingclub.com.au/fo...y-Latest-Daily

  8. #8
    Senior Member gumbie's Avatar
    Join Date
    Jan 2009
    Name
    Jordan
    State
    QLD
    Location
    Sunshine Coast
    Country
    Australia
    Posts
    605

    Default

    Hey mate, i got a Recaro recliner with a rail that bolts into ae86, you can have it for $250. let me know, Btw it's got a slight tear.

Similar Threads

  1. bodykit and seats/rails for 84 adm, ae86.
    By crispian in forum Cars or Parts Wanted
    Replies: 0
    Last Post: 31st July 2011, 12:01 AM
  2. [BNE] XR4's, AE86 Rear Bumper + Bumper Mounts
    By hao. in forum Car Parts For Sale
    Replies: 11
    Last Post: 5th June 2009, 10:24 PM
  3. adm 86 stock front and rear bumper
    By DriftPlease in forum Car Parts For Sale
    Replies: 11
    Last Post: 2nd February 2008, 05:27 PM
  4. Syd: stock blue/purple sprinter seats w/ rails
    By admHACHI in forum Car Parts For Sale
    Replies: 4
    Last Post: 9th November 2007, 12:11 PM
  5. ae86 stock front and rear bumper.
    By Tristan in forum Cars or Parts Wanted
    Replies: 1
    Last Post: 29th April 2007, 01:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •