Page 1 of 6 1 2 3 4 5 6 LastLast
Results 1 to 10 of 51

Thread: Brendon's ADM 86

  1. #1
    Senior Member AE86 Spoontah's Avatar
    Join Date
    Dec 2008
    Name
    Brendon
    State
    WA
    Location
    Ellenbrook
    Country
    Australia
    Posts
    217

    Default Brendon's Track 86

    Hey guys, I have decided to make this car a tracker as it's easier for me and on the funds.

    SPECS:

    MAKE: AE86 Levin

    INTERIOR:
    -Drift steering wheel
    -Battery relocated in boot
    -Battery isolator
    -Fixed back bucket seat
    -Rear strut brace with harness mount
    -Blue dildo knob
    -No stereo
    -Charcoal hammer finish
    -Speco oil, volts and boost gauge
    -Hydraulic handbrake

    ENGINE:
    -AW11 AFM 4AGZE
    -Block rebored 20 thou oversize
    -Stock headgear
    -Every single seal and gasket replaced
    -Balanced rods
    -7MGTE injectors
    -S14 T28 BB turbo
    -Genuine SARD FPR
    -Custom alloy radiator
    -Custom made FMIC
    -Remote mount oil filter
    -Generic catch can
    -Skyline brake booster and master cylinder
    -10mm stainless fuel lines
    -Custom rad support
    -Engine bay rewired
    -2.5" IC piping
    -GFB manual boost controller
    -10" Thermo fan
    -Drift pod filter
    -Old school SAFC
    -Bosch 040 fuel pump
    -VL Turbo lift pump
    -1.5L surge tank with Speedflow fittings
    -Custom air box
    -Custom surge tank box with perspecs top

    DRIVETRAIN:
    -Rebuilt F series from a MS112 Crown with torsen centre
    -New bearings and seals
    -T3 5 Link stud conversion
    -Watts linkages
    -Rebuilt Supra five speed gearbox(W57)
    -Extreme 4Puck button clutch
    -Bill Sherwood bell housing adaptor
    -Modified tailshaft and Porsche unis

    SUSPENSION AND BRAKES:
    -Adjustable Panhard rods on all arms
    -Koni's and Lovell's shocks and springs
    -Whitleline swaybars
    -New nolothane bushes all round
    -Nissan Skyline 32GTR twin rotor four pot calipers on custom T3 5 stud hubs with DBA slotted up front
    -Twin 32GTR single caliper's with DBA slotted rotors on rear
    -New custom brackets
    -New bearings

    EXTERIOR:
    -Complete set of Whitelines (one damaged)
    -Fully sick garden edging front lip
    -Clear bumper indicators
    -Genuine TRD side skirts
    -Set of Ford ZR4 15x7" rims
    -Pair of 15x8 -16 SSR Five stars
    -Federal tyres
    -Bonnet pins

    ATM i'm really just concentrating on getting all the rust out of the car as it was pretty bad and i'm cleaning up the engine bay more. Should have some pics up tommorow.
    Last edited by AE86 Spoontah; 11th June 2012 at 08:22 PM.

  2. #2
    Senior Member AE86 Spoontah's Avatar
    Join Date
    Dec 2008
    Name
    Brendon
    State
    WA
    Location
    Ellenbrook
    Country
    Australia
    Posts
    217

    Default

    Been a while since I have updated but I'm busy working on the 86

    Changed a lot of things in the engine bay as i wasn't happy with most of it but after spending alot of money and time on it i'm really happy with the end result.

    -Repainted manifold high temp gloss black
    -Repolished inlet manifold (thanks Lisa!!! )
    -Hid majority of wiring loom
    -Painted fuel rail anodised purple
    -Relocated oil filter with speedflow fittings and SS lines
    -Installed SARD fuel reg with aforementioned lines
    -New brake booster line
    -Fitted RWD alternator bracket

    Got my mate welding the mount's back on for the fuel tank at the moment and are hoping to weld the rest of the rear end up by the weekend and have it bogged.

    I'll let the pics do the talking now












  3. #3
    Senior Member AE86 Spoontah's Avatar
    Join Date
    Dec 2008
    Name
    Brendon
    State
    WA
    Location
    Ellenbrook
    Country
    Australia
    Posts
    217

    Default

    Got a fair bit of body work done on my car today with the help of a mate who's in the first pic. Still have to finish welding the boot up and bog it then respray the rear quarters hopefully tommorow. Progress is moving along quickly and hope to have it running next weekend when my RWD water pump arrives.












  4. #4
    Senior Member Beserker99's Avatar
    Join Date
    Dec 2008
    Name
    Phirom
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    881

    Default

    Oooooooooooooooooo, interesting

    Did you get those wheels yet from the japland that you said you would?

  5. #5
    8ball
    Guest

    Default

    What model skyline is the booster from mate.

  6. #6
    Senior Member AE86 Spoontah's Avatar
    Join Date
    Dec 2008
    Name
    Brendon
    State
    WA
    Location
    Ellenbrook
    Country
    Australia
    Posts
    217

    Default

    Yeah i did. Still need to finish polishing them up but i'll get a pic tonight

  7. #7
    Senior Member AE86 Spoontah's Avatar
    Join Date
    Dec 2008
    Name
    Brendon
    State
    WA
    Location
    Ellenbrook
    Country
    Australia
    Posts
    217

    Default

    R33 brake booster and master cylinder but not too sure if it's off a turbo model or not

  8. #8
    Senior Member AE86 Spoontah's Avatar
    Join Date
    Dec 2008
    Name
    Brendon
    State
    WA
    Location
    Ellenbrook
    Country
    Australia
    Posts
    217

    Default

    More progress today after doing nothing yesterday Got the left rear quarter painted and it turned out real good. Primed the right rear quarter as well coz it had a lot of scratches and some small dings in it. Almost finished bogging the rear up so should have that done and primed tomorrow.




  9. #9
    Veteran shift_rook's Avatar
    Join Date
    Dec 2008
    Name
    Chris
    State
    VIC
    Location
    SE Burbs
    Country
    Australia
    Posts
    4,719

    Default

    lookin tops, will keep checkin this for updates

  10. #10
    Veteran Nikkojoe's Avatar
    Join Date
    Dec 2008
    Name
    Tom
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    2,260

    Default

    looking good

    can you do mine now?
    1983 AE86 ADM rust spec goodness track car build - end of the road
    1984 AE86 Silver ADM mk2 daily build - SOLD
    1984 AE86 ADM granny car daily now 4AGZE - SOLD
    1983 AE86 ADM Engine Conversion Slut - SOLD
    2002 IS200 6spd - new daily in progress
    1986 AE86 JDM GT-Apex Levin Notchback ready to roll......

Page 1 of 6 1 2 3 4 5 6 LastLast

Similar Threads

  1. Replies: 5
    Last Post: 9th February 2012, 11:05 PM
  2. Replies: 10
    Last Post: 24th May 2010, 09:27 PM
  3. Brendon's ADM Sprinter
    By AE71 Rolla in forum AE86 Owners Forums
    Replies: 154
    Last Post: 27th September 2008, 11:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •