Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 21

Thread: Panda Painting

  1. #1

    Default

    hey guys
    i have primed my car ready for paint and have come across the drama of where to start when i paint my car panda white and black. as you see in my avatar.

    im worried about where to start the black from i had a look on the site to see if i could find a pande sprinter side on to get a idea but have had no luck.

    any help would be great

  2. #2
    Senior Member lo_rolla's Avatar
    Join Date
    Dec 2008
    Name
    Damien
    State
    QLD
    Location
    Brissie
    Country
    Australia
    Posts
    681

    Default

    Does this help?
    My AE86 race, street, drift build.

    http://www.ae86drivingclub.com.au/fo...ead.php?t=4156
    With Super Thanks to AJPS for all your AE86 and BBQ needs.

  3. #3

    Default

    i certanily does.
    just my sprinter is a hatch and dont have pop up head lights..
    lol

  4. #4
    Senior Member lo_rolla's Avatar
    Join Date
    Dec 2008
    Name
    Damien
    State
    QLD
    Location
    Brissie
    Country
    Australia
    Posts
    681

    Default

    I tried my best....
    My AE86 race, street, drift build.

    http://www.ae86drivingclub.com.au/fo...ead.php?t=4156
    With Super Thanks to AJPS for all your AE86 and BBQ needs.

  5. #5

    Default

    It follows the exact same schematic as the coupe.

  6. #6
    Veteran ae86hachiroku's Avatar
    Join Date
    Nov 2008
    Name
    Ken
    State
    WA
    Location
    Spearwood
    Country
    Australia
    Posts
    1,586

    Default

    hmm a small tip that the oem panda paint with the arches..
    the black does not touch the edge of the flares but just a little bit below.. if that makes any sense..
    if the bumper is a zenki.. the white on top shouldn't be on the top but in the middle accross the parkers.

  7. #7

    Default

    does it touch the arches on any cars or just this one.
    now that will be a pain to mask up and paint.

  8. #8
    Senior Member
    Join Date
    Dec 2008
    Name
    stefan
    State
    vic
    Location
    eastern suburbs
    Country
    australia
    Posts
    725

    Default

    to get this straight for everyone, the arches are painted in the same width as between the skuff strip and that kink in the door

    compass + pencil works wonders

  9. #9
    Veteran ae86hachiroku's Avatar
    Join Date
    Nov 2008
    Name
    Ken
    State
    WA
    Location
    Spearwood
    Country
    Australia
    Posts
    1,586

    Default

    all of them kurtis from factory

  10. #10

    Default

    so you say that "the arches are painted in the same width as between the skuff strip and that kink in the door" are you just measuring the width that is painted black or do you measure from skuff strip to th start of the kink?
    just checking.
    also can you buy white scuff strips or do just paint stock ones?

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Painting Costs.
    By corknose in forum Sydney & NSW Events and Discussion
    Replies: 15
    Last Post: 1st February 2010, 02:21 AM
  2. Painting a Car
    By Low Style in forum Technical - Questions
    Replies: 27
    Last Post: 17th September 2009, 11:33 PM
  3. Painting Costs.
    By corknose in forum General Topics (No Technical Questions)
    Replies: 10
    Last Post: 20th June 2009, 03:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •