pm'ed
Need some stuff gone, as I have run out of storage space.
Location : ADELAIDE Campbelltown/Newton area.
PICKUP ONLY
1. 2T-G engine, low km jap import, imported around 15 years ago, sitting collecting dust.
Comes with 4 to 1 extractors
Condition - was good, but may need some new seels, etc.
$500,- ono SOLD
2. 3T-C Taken out of a good driving T18 with about 70k km's on the clock, sitting for about 5 years.
Comes with T50
Condition - looks good, may need new seals.
$300,- ono
3. 2.5" press bent exhaust from my 3T-GTEU powered T18, comes with two straight through mufflers.
Condition - used for about 1.5 yrs, then lay in the shed. Come in two pieces, needs to be re-weled together.
$200,- ono
4. T18 tailshaft
Condition - bearing ok, tailshaft ok.
$80,- SOLD
5. "LEBEN" 5 Spoke 14x6" rims, 4x114,3 and 4x100 (I think) offset 30 or 35 - they fit on the back of a T18 with no clearance issues, but needed 5mm spacers on the front, which had TT132 struts.
Come with tires - two are bold (205/60 yokohamas), two G'Grids (195/60) have a lot of meat, but been sitting so long they can be used for sliding/burnouts only.
Condition - some slight gutter marks on a couple of the wheels, one has a bit of a crack on the plastic cover.
$130,- SOLD
6. T18 Struts, with springs and brakes
Condition - good.
$130,- ono
7. One piece tailshaft, pro. balanced & painted, fits a T18 with 3T-GTEU/W5x perfect.
Condition - excellent
$150,- ono
8. 3T-GTEU turbo-to-inlet manifold pipe, with a short pipe welded on for a BOV.
Good condition
$20,- SOLD
9. T18 Diff. With center, unknown ratio. No brakes.
Condition - Housing is in very good condition, the center is in unknown condition, but doesn't have any play, gears don't look like they're worn. I don't know what ratio it is, I have to count the teeth next time I'm at the shed.
$200,-
10. Oil Cooler - by the writing on it, looks like it came out of a AE92 - I used it in my T18/3T-GTEU - comes with a bracket to mount on a T18, and a length of hose.
Condition - Very good
$50,- SOLD
11. Unknown rear swaybar - fits diffs without mounts - it's either for a T18 or TA22 Celica, I can't remember, I can measure it if anyone is interested - complete.
Condition - Very good.
$70,-
Will be adding more stuff and photos soon.
Location : ADELAIDE Campbelltown/Newton area.
Contact: Rob, pm me.
PICKUP ONLY
Last edited by dAYTONA; 14th January 2010 at 08:27 AM. Reason: added stuff
toyota-power.com maximum toyota power
www.levin.pl
6 x AE86 euro spec (4AGE, LSD, etc..) 2 kouki, 4 zenki
pm'ed
I'll take the 3T-GTE tailshaft if there is no interest in SA for it, and if you are willing to ship it to Perth.
PM me if so
Added photos and 3T-GTEU turbo-to-inlet pipe.
2T-G SOLD (with extractors)
toyota-power.com maximum toyota power
www.levin.pl
6 x AE86 euro spec (4AGE, LSD, etc..) 2 kouki, 4 zenki
do you have any spare 2tg parts? timing chain tensioner bolt thing or even a set of head bolts?
cheers
T18 in the build
Hey, sorry, I don't have anything like that.
toyota-power.com maximum toyota power
www.levin.pl
6 x AE86 euro spec (4AGE, LSD, etc..) 2 kouki, 4 zenki
this motor will be making happy noises soon
New stuff added.
toyota-power.com maximum toyota power
www.levin.pl
6 x AE86 euro spec (4AGE, LSD, etc..) 2 kouki, 4 zenki
Hey,
I'm looking for a small part that connects the speedo cable to the gearbox.
The part is a right angled metal tube. one end screws into the gearbox and the other into another metal part leading to the speedo cable.
Dont spose you gots one?
taa,
Alex
I'm interested in the oil cooler if you decide to post.
I'm in Perth.
Thanks.