Need some stuff gone, as I have run out of storage space.
Location : ADELAIDE Campbelltown/Newton area.
PICKUP ONLY
1. 2T-G engine, low km jap import, imported around 15 years ago, sitting collecting dust.
Comes with 4 to 1 extractors
Condition - was good, but may need some new seels, etc.
$500,- ono SOLD
2. 3T-C Taken out of a good driving T18 with about 70k km's on the clock, sitting for about 5 years.
Comes with T50
Condition - looks good, may need new seals.
$300,- ono
3. 2.5" press bent exhaust from my 3T-GTEU powered T18, comes with two straight through mufflers.
Condition - used for about 1.5 yrs, then lay in the shed. Come in two pieces, needs to be re-weled together.
$200,- ono
4. T18 tailshaft
Condition - bearing ok, tailshaft ok.
$80,- SOLD
5. "LEBEN" 5 Spoke 14x6" rims, 4x114,3 and 4x100 (I think) offset 30 or 35 - they fit on the back of a T18 with no clearance issues, but needed 5mm spacers on the front, which had TT132 struts.
Come with tires - two are bold (205/60 yokohamas), two G'Grids (195/60) have a lot of meat, but been sitting so long they can be used for sliding/burnouts only.
Condition - some slight gutter marks on a couple of the wheels, one has a bit of a crack on the plastic cover.
$130,- SOLD
6. T18 Struts, with springs and brakes
Condition - good.
$130,- ono
7. One piece tailshaft, pro. balanced & painted, fits a T18 with 3T-GTEU/W5x perfect.
Condition - excellent
$150,- ono
8. 3T-GTEU turbo-to-inlet manifold pipe, with a short pipe welded on for a BOV.
Good condition
$20,- SOLD
9. T18 Diff. With center, unknown ratio. No brakes.
Condition - Housing is in very good condition, the center is in unknown condition, but doesn't have any play, gears don't look like they're worn. I don't know what ratio it is, I have to count the teeth next time I'm at the shed.
$200,-
10. Oil Cooler - by the writing on it, looks like it came out of a AE92 - I used it in my T18/3T-GTEU - comes with a bracket to mount on a T18, and a length of hose.
Condition - Very good
$50,- SOLD
11. Unknown rear swaybar - fits diffs without mounts - it's either for a T18 or TA22 Celica, I can't remember, I can measure it if anyone is interested - complete.
Condition - Very good.
$70,-
Will be adding more stuff and photos soon.
Location : ADELAIDE Campbelltown/Newton area.
Contact: Rob, pm me.
PICKUP ONLY