Results 1 to 4 of 4

Thread: guard flaring

  1. #1
    Glenn ke_70's Avatar
    Join Date
    Dec 2008
    Name
    Clay
    State
    SA
    Location
    Barossa!
    Country
    Australia
    Posts
    5,318

    Default guard flaring

    who and were does guard flaring is sa? how much 2

  2. #2
    Member
    Join Date
    Mar 2009
    Name
    Josh
    State
    South Australia
    Location
    Adelaide
    Country
    Australia
    Posts
    51

    Default

    Wheelworx do it, and they do a good job. But it's Wheelworx, so expect to pay through the nose.

    I would assume AJPS could do it.

  3. #3
    Veteran R&D Mechanical's Avatar
    Join Date
    Dec 2008
    Name
    Davey & Riki-lee
    State
    South Australia
    Location
    Seaford SA
    Country
    Australia
    Posts
    3,003

    Default

    Chet aka superbmobile does a sick job aswell, this is my car that he did the guards on, they are ma61 wheels which have 25mm bolt on spacers and still had lots of room, great if you are running big offset wheels.


    R&D Mechanical, Seaford SA - please visit www.rdmechanicalshop.com
    Our introduction - Click here

  4. #4
    Senior Member
    Join Date
    Dec 2008
    Name
    Joel
    State
    SA
    Location
    Blackwood
    Country
    Australia
    Posts
    717

    Default

    Do it yourself. Buy a hammer and a dolly and smash the shit out them (neatly!).

    I have flared about 10 KE70 front guards in my time and it is not at all difficult...just time consuming and takes a bit of effort.

    DO NOT get a conventional 'guard roller', these won't give you what you are after on KE fronts (Good for KE rears).
    AE86 4AGE "Slowly but surely"

Similar Threads

  1. guard flaring
    By pet0r in forum Brisbane & QLD Events and Discussion
    Replies: 11
    Last Post: 27th December 2010, 12:02 PM
  2. guard flaring
    By Brenton 86 in forum Brisbane & QLD Events and Discussion
    Replies: 1
    Last Post: 16th April 2009, 11:25 PM
  3. How to: Guard flaring
    By 70XIN in forum Technical - Articles
    Replies: 71
    Last Post: 5th May 2008, 01:37 PM
  4. flaring guard help
    By grassworkzgarage in forum Technical - Questions
    Replies: 4
    Last Post: 4th July 2006, 03:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •